Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
30 31 32 33 34
Suivant
size 104.62mixo-CCPZPA
Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.27mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.62mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 57.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 77.27-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 104.62mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 77.27mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 77.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 57.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.27mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CCW PD 24
    Punching units for panel cut out of bulkhead mounting houdings
    size 49.16mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 44.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CYG 06H10
    1 branch-off T-Box coupling to be fitted on DIN rails
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 49.16-CCW M25
    Punching nut for M25 hole
    size 49.16-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    CHCW 06 L
    Cover with pegs
  • For 1 lever enclosures
    • CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    AT U3F
    RJ45/USB/LC Connectors for ATR C22
  • USB 3.0 coupler F-F Type A
    • CZCW 15 LG
    Cover with lever
  • For enclosures with pegs
    • size 44.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    CHC 50
    Covers with 4 pegs
  • For enclosures with 2 levers
    • size 32.13-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    CYPZ LOC
    Locator for CY contacts
    size 104.62-CCTPACF
    Positioner inserts female contacts 16A
    size 66.16-CCPR RN
    Replacement tip for CCES removal tool
    size 57.27-CW 1 J2M87
    Patch cord RJ45 with 2 RJ45 male connectors
  • with 8 data contacts
    • ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 44.27mixo-CITP D
    Turret head for CI contacts
    size 66.16-COB L
    Levers for coupling with metallic enclosures
  • Kit with 2 element, to be mounted instead of the standard levers to be coupled with: COB TCQ and COB..BC
    • CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • CCPNP
    "go /no go" control gauge to verify indenter closure
    size 44.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    size 49.16-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • CR 10 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CYG 8/2 JFA
    Female RJ 45 coupling, 8 data contacts / 2 power contacts
  • Metal version
    • Nominal rated voltage: 50 V
    Locking Mecahnism: Single locking lever
    Material housing: Metal
    size 44.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CRM
    Male double coding and guide pins, for 16 codes
    size 57.27-CHC 10 C
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 44.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • TCHC 10
    Covers with 4 pegs
  • Plastic,with eyelet
    • CKG 03 CN
    Black cover with pegs and gasket
    CX CFM
    Lock-in tabs for modular units (6units) dividable
    CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 44.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CCW M25
    Punching nut for M25 hole
    size 49.16mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 44.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    CG 06 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 66.40-CCTPACM
    Positioner inserts male contacts 16A
    size 66.16-CCW CT
    Hydraulic punching tool
    size 49.16-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • C7 06 FL-N
    Frames for bulkhead mounting housings
    size 66.40 72-CRM
    Male coding and guide pin, for 72 codes
    size 32.13-CCTPACM
    Positioner inserts male contacts 16A
    size 44.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 66.16-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 32.13-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 104.62-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 66.16 72-CRM
    Male coding and guide pin, for 72 codes
    size 57.27mixo-CR 10 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 57.27mixo and mixo frames for 3 inserts
    • CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 44.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    size 49.16-CCTPADM
    Positioner inserts male contacts 10A
    size 57.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 49.16-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 57.27-COB TCQ
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
    CW 1 SC9
    SC duplex patch cord GL fibre E9/125 Yellow
    size 44.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    CHCW 10 G
    Cover with 4 pegs
  • For enclosures with 2 levers
    • CGKCP FX
    Dust protection cover for housings high protection IP68
    size 49.16mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CHC 10 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • CKR 65
    Gasket and screw kit for IP66/IP67
  • For CK,CQ 05, CKS inserts
    • CR 06 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 44.27 and Mixo frames for 2 inserts
    • size 77.27-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 104.62mixo-CGPZ LOC
    Locator for CG contacts
    size 77.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 77.62mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 57.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.27mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 77.27-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 104.62mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 77.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.62-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 57.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.27-CLC4
    Polish paper grain size 4000
    size 57.27mixo-CYPZ LOC
    Locator for CY contacts
    size 104.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    Montrer 30 50 100 par page
    Précédente
    30 31 32 33 34
    Suivant