Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
35 36 37 38 39
Suivant
size 77.27mixo-CIES
insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 77.62-CRM
    Male double coding and guide pins, for 16 codes
    ATR C22
    Cover for RJ45/USB/LC Connector
  • Communication interface bulkhead IP65
    • size 57.27-CRIC M3
    Panel fitted insert fastening screws
    size 44.27mixo-CCVPP
    Pneumatic foot valve
    size 104.62-CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • size 77.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62-CLSP
    Fibre stripper for POF fibre optic
    size 57.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 44.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 104.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 57.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 57.27-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 44.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.62mixoCY-CGD 25...
    Crimp matrixes for CY contacts section 16mm²
    size 77.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 77.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 57.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 57.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 104.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • CR 37 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 77.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CHIN 10
    Bulkhead mounting housings with double lever
  • Aluminium
    • Locking Mecahnism: Double locking levers
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP65
    size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 77.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • CHCS 16
    Cover for electromagnetic compatibility with 4 pegs
  • For enclosures with 2 levers
    • size 77.62-CR GND
    Metal adaptor
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 104.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • CHC 16 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 77.62-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 77.62-CCTPACM
    Positioner inserts male contacts 16A
    size 77.27-CCW M25
    Punching nut for M25 hole
    size 57.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 77.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    THCW 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 77.62-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 32.13-CCW CT
    Hydraulic punching tool
    size 57.27-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 44.27-CLC1
    Polish paper grain size 1000
    size 104.62-CR 72
    Single coding and guide pin, for 72 codes
    size 77.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 77.62-CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • size 57.27-CLSP
    Fibre stripper for POF fibre optic
    CX7PZ LOC
    Locator for CX7 contacts
    size 104.62-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 77.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 44.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 104.62mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 57.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • CHCP 10 V
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs with gasket
    • CRN 3
    Gaskets for ribbon cable hood
  • one slot for cable sizes 36 x 9 mm
    • size 49.16mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 104.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    CXTP 40 F
    Turret heads for female contacts 40A
    size 49.16mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 66.40-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 104.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 66.40-CR CP
    Plain coding pin for CD and CDD inserts
    size 77.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 32.13-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 104.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 66.16-CCTPACF
    Positioner inserts female contacts 16A
    size 32.13-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 66.16-CR CP
    Plain coding pin for CD and CDD inserts
    CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.27mixo-CX CFM
    Lock-in tabs for modular units (6units) dividable
    CZC 25 SL
    Covers, with 2 pegs
  • For 1 lever enclosures
    • size 104.62-CCPR RN
    Replacement tip for CCES removal tool
    CKM 03 T3
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 1 with pole 2
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 49.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CWK 10 J2M8
    Patch cord with 2 RJ45 connectors, male inserts
  • 8 data contacts, in insulating enclosure
    • Protection degree: IP65
    size 104.27 72-CRF
    Female coding and guide pin, for 72 codes
    CG 24 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • CHC 24 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 49.16mixo-CCTPACF
    Positioner inserts female contacts 16A
    CK 03 CA
    Covers, with 2 pegs
  • for male inserts
    • size 104.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 77.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 49.16mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 104.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • Montrer 30 50 100 par page
    Précédente
    35 36 37 38 39
    Suivant