Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
35 36 37 38 39
Suivant
size 104.62 72-CRM
Male coding and guide pin, for 72 codes
size 44.27mixo-CCVPP
Pneumatic foot valve
CR VPTG
Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • size 77.62-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 104.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.62-CLSP
    Fibre stripper for POF fibre optic
    size 44.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 77.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 77.62mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 57.27-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 104.27-CR GND
    Metal adaptor
    size 44.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.62mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 57.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 104.27mixo-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 77.62mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    CHIN 10
    Bulkhead mounting housings with double lever
  • Aluminium
    • Locking Mecahnism: Double locking levers
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CR CP
    Plain coding pin for CD and CDD inserts
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • size 104.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • size 77.62-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CRIC M3
    Panel fitted insert fastening screws
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • size 104.62-CR GND
    Metal adaptor
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 77.62mixo-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.27-CCTPACM
    Positioner inserts male contacts 16A
    size 104.62-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CCW PD 03G
    Punching units for panel cut out of bulkhead mounting houdings
  • For CKG IP68 enclosures
    • COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 77.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 77.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 77.27-CCW CT
    Hydraulic punching tool
    THCW 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 104.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 44.27-CLC1
    Polish paper grain size 1000
    size 77.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62-CRAS
    Angled cable clamping plate
    size 104.62-CRIC M3
    Panel fitted insert fastening screws
    CX7PZ LOC
    Locator for CX7 contacts
    size 77.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 77.62-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 104.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 44.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 77.62mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    CHCP 10 V
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs with gasket
    • size 77.27mixo-CCVPP
    Pneumatic foot valve
    size 66.16-CR 20
    Single code pins for 6 codings
    size 57.27-CCPR RN
    Replacement tip for CCES removal tool
    size 21.21-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 49.16-CCTPACF
    Positioner inserts female contacts 16A
    size 57.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CR K04G
    Plain coding pin for CK/CKS 04 inserts
  • Yellow
    • size 77.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 49.16-CR CP
    Plain coding pin for CD and CDD inserts
    size 57.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 57.27mixo-CYPZ LOC
    Locator for CY contacts
    CKA 03 CAS
    Covers, with 2 pegs
  • for male inserts
    • size 77.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 49.16mixo-CX7PZ LOC
    Locator for CX7 contacts
    size 57.27mixo-CITP D
    Turret head for CI contacts
    size 77.27mixo-CR 16 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 49.16mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 57.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    CHC 06 L
    Covers with pegs
  • For enclosures with lever
    • size 104.62-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 57.27mixo-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 66.40-CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • CHCN 16
    Covers with pegs
  • Aluminium
    • CZC 15 SL
    Covers with 2 pegs
  • For 1 lever enclosures
    • size 57.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 66.16-CCTPADF
    Positioner inserts female contacts 10A
    TCHC 16
    Covers with 4 pegs
  • Plastic, with eyelet
    • size 32.13-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 66.16-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 57.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CCTPACM
    Positioner inserts male contacts 16A
    CZCW 25 LG
    Cover with lever
  • For enclosures with pegs
    • size 57.27-CR 72
    Single coding and guide pin, for 72 codes
    CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 77.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 49.16-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 57.27-CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • Montrer 30 50 100 par page
    Précédente
    35 36 37 38 39
    Suivant