Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
86 87 88 89 90
Suivant
AT LCMM
RJ45/USB/LC Connectors for ATR C22
  • LC-Duplex adapter MM
    • size 57.27-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 44.27-CR GND
    Metal adaptor
    size 77.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    TCHC 10 S
    Covers with 4 pegs
  • Plastic,with loop
    • size 57.27-CLC1
    Polish paper grain size 1000
    size 104.62-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 44.27mixo-CR 06 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 77.27mixo-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 44.27-CCTPACF
    Positioner inserts female contacts 16A
    size 104.62-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    CR 06 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • size 77.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 77.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 44.27-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 57.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 104.62mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CHCN 06 L
    Covers with pegs
  • Aluminium
    • size 77.62mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 77.27mixo-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 44.27-CRIC M3
    Panel fitted insert fastening screws
    size 57.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 104.62mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    TCHC 06 L
    Covers with pegs
  • With eyelet
    • size 77.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.27-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 44.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 104.62mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • Montrer 30 50 100 par page
    Précédente
    86 87 88 89 90
    Suivant