Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
68 69 70 71 72
Suivant
size 104.62mixo-CYD 35 C
Crimp matrixes for CY contacts section 25 mm² and 35 mm²
size 104.27-CR 24 ST
Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 49.16mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CCW PD 10
    Punching units for panel cut out of bulkhead mounting houdings
    size 77.62mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 104.27-CRAS
    Angled cable clamping plate
    size 66.40-CCTPADM
    Positioner inserts male contacts 10A
    size 104.62mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • THCC 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 32.13-CCW M25
    Punching nut for M25 hole
    size 77.62mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 104.27-CLDL
    Polishing disc for POF and MOST contacts
    size 66.40-CR 72
    Single coding and guide pin, for 72 codes
    size 104.62mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CRN 2
    Gaskets for ribbon cable hood
  • one slot for cable sizes 63.8 x 5.1 mm
    • size 32.13-CCTPADM
    Positioner inserts male contacts 10A
    AT 8 FT
    RJ45/USB/LC Connectors for ATR C22
  • RJ45 coupler Cat6
    • size 77.62mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 104.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 66.16-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 32.13-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 66.16-CR 72
    Single coding and guide pin, for 72 codes
    size 104.62-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 77.27-CRF
    Female double coding and guide pins, for 16 codes
    CCVPP
    Pneumatic foot valve
    size 77.62-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 104.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CZC 25 L
    Covers, with 2 pegs
  • For 1 lever enclosures
    • size 77.62-CCTPADM
    Positioner inserts male contacts 10A
    size 77.27-CR CP
    Plain coding pin for CD and CDD inserts
    CKM 03 T1
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 2 with pole 3
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    size 104.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 49.16-CCPR RN
    Replacement tip for CCES removal tool
    size 77.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CW 1 SC62
    SC duplex patch cord GL fibre G62,5/125 Orange
    size 104.62-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 77.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    CRH 24
    24 pole closure or reduction plate
  • In autoextinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    size 49.16mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • CK 03 C
    Covers, with 2 pegs and gasket
  • For female inserts
    • size 104.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.62mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CR 24 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • Montrer 30 50 100 par page
    Précédente
    68 69 70 71 72
    Suivant