Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
85 86 87 88 89
Suivant
size 57.27CR..SC-CR 05 CA
U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • CHC 16 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • size 66.16-CCTPADM
    Positioner inserts male contacts 10A
    size 104.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 32.13-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CHIN 10
    Bulkhead mounting housings with double lever
  • Aluminium
    • Locking Mecahnism: Double locking levers
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 77.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 66.16-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.27-CR GND
    Metal adaptor
    CCTPADF
    Positioner inserts female contacts 10A
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 77.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • size 57.27-CR 20
    Single code pins for 6 codings
    CZCS 25 L
    Cover for electromagnetic compatibility with pegs
  • For 1 lever enclosures
    • size 104.27mixo-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    size 77.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 57.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 49.16-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • CYG 8/2 JF
    Female RJ 45 coupling, 8 data contacts/ 2 power contacts
  • insulated version
    • Nominal rated voltage: 50 V
    Locking Mecahnism: Single locking lever
    Material housing: Plastic
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • Montrer 30 50 100 par page
    Précédente
    85 86 87 88 89
    Suivant