Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
35 36 37 38 39
Suivant
CHC 24 LG
Covers with 1 lever
  • For hoods with 2 pegs
    • size 57.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 32.13-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 104.62-CLDL
    Polishing disc for POF and MOST contacts
    ZEB 09
    IDC connectors with double-contacting
  • Strain relief bracket
    • Number of contacts of range: 9-50
    size 77.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 77.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    CCTPADF
    Positioner inserts female contacts 10A
    size 104.62mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 104.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • CR 37 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 77.27-CCPR RN
    Replacement tip for CCES removal tool
    CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 104.62mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 104.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 77.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 77.27-CRAS
    Angled cable clamping plate
    size 49.16-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 57.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CYG 8/2 JF
    Female RJ 45 coupling, 8 data contacts/ 2 power contacts
  • insulated version
    • Nominal rated voltage: 50 V
    Locking Mecahnism: Single locking lever
    Material housing: Plastic
    CHCS 16
    Cover for electromagnetic compatibility with 4 pegs
  • For enclosures with 2 levers
    • size 77.27-CLSP
    Fibre stripper for POF fibre optic
    size 49.16-CRIC M3
    Panel fitted insert fastening screws
    size 57.27mixo-CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CHC 16 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 49.16mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 57.27-CGCP 10 FX
    Dust protection cover for housings high protection IP68
    CK 03 CX
    Covers, with lever and gasket
  • For female inserts
    • size 57.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • 5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 57.27-CYG 06H0606
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "44.27" size fixing side housing and one "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 57.27-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 49.16mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    CGC 10
    Cover for screw locking
  • Aluminium
    • KL 93 B
    Cable bushings
  • 50 pole for series 17,47 and 57
    • Cable diameter range: 9,3-10,3 mm
    size 104.62-CCTPACF
    Positioner inserts female contacts 16A
    size 104.27-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CLSP
    Fibre stripper for POF fibre optic
    size 77.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 49.16-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 104.62-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • 55 24 MT
    Thumb screw tinnen with slote fitting for diecast hoods
  • Length is 24 mm
    • CR 24 BPE
    PE jumpers
  • Galvanized brass
    • size 32.13-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CRN 3
    Gaskets for ribbon cable hood
  • one slot for cable sizes 36 x 9 mm
    • size 57.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • CR 08 EMC
    Conductive gasket for CQM male inserts
    size 104.62mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 104.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    CXTP 40 F
    Turret heads for female contacts 40A
    size 57.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.62mixo-CGPZ LOC
    Locator for CG contacts
    size 104.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • CR..SSsize 77.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 77.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 49.16-CCTPACM
    Positioner inserts male contacts 16A
    size 57.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CR K04R
    Plain coding pin for CK/CKS 04 inserts
  • Red
    • size 104.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    CHCN 16 G
    Covers with 2 levers
  • Aluminium
    • size 77.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 49.16-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27-CR GND
    Metal adaptor
    CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 104.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • TCHC 16 S
    Covers with 4 pegs
  • Plastic, with loop
    • size 77.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    CLSP
    Fibre stripper for POF fibre optic
    size 57.27mixo-CR 10 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CKAX 03 CX
    Covers, with stainless steel lever and gasket
  • For female inserts
    • size 104.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27-CCVPP
    Pneumatic foot valve
    size 77.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 49.16mixo-C7ES
    Removal tool for 70A CX7 series contact
    size 57.27-CR 10 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 57.27 and mixo frames for 3 inserts
    • size 104.27mixo-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 57.27-CR CP
    Plain coding pin for CD and CDD inserts
    size 77.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 49.16mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • CHCN 10
    Covers with pegs
  • Aluminium
    • size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 57.27-CRIC M3
    Panel fitted insert fastening screws
    size 77.62-CRF
    Female double coding and guide pins, for 16 codes
    size 44.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.62-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    size 104.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • CHC 10
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 77.62mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    CCW PD 15
    Punching units for panel cut out of bulkhead mounting houdings
    Montrer 30 50 100 par page
    Précédente
    35 36 37 38 39
    Suivant