Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
37 38 39 40 41
size 57.27-CX 02 BM
Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    COB L
    Levers for coupling with metallic enclosures
  • Kit with 2 element, to be mounted instead of the standard levers to be coupled with: COB TCQ and COB..BC
    • size 77.27-CRAD
    Straight cable clamping plate
    TCHC 16
    Covers with 4 pegs
  • Plastic, with eyelet
    • CR 37 AD
    Plates for 1 D-sub insert, CZ/MZ/MZF enclosures
    Protection degree: IP65
    size 57.27-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 32.13-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 44.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CCW PD 16
    Punching units for panel cut out of bulkhead mounting houdings
    size 104.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • CQ 08 C
    Covers with 2 pegs
  • Thermoplastic resin cable glands
    • size 77.27mixo-CYPZ LOC
    Locator for CY contacts
    size 44.27mixo-CR 06 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 44.27 and Mixo frames for 2 inserts
    • size 57.27-CR 72
    Single coding and guide pin, for 72 codes
    size 44.27-CCW M25
    Punching nut for M25 hole
    CHIN 10
    Bulkhead mounting housings with double lever
  • Aluminium
    • Locking Mecahnism: Double locking levers
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP65
    CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CHC 10 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • size 77.27mixo-CITP D
    Turret head for CI contacts
    CHCP 06
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • size 57.27-CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • AT U2F
    RJ45/USB/LC Connectors for ATR C22
  • USB 2.0 coupler F-F Type A
    • size 49.16-CCVPP
    Pneumatic foot valve
    size 104.27-CGCP 24 MB
    Dust protection cover for hoods high protection IP68
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CRIC M3
    Panel fitted insert fastening screws
    size 44.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    CYG 06H10D
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "57.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 57.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 49.16 72-CRF
    Female coding and guide pin, for 72 codes
    size 104.27-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 21.21-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 44.27-CR 20
    Single code pins for 6 codings
    size 77.27mixo-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CHCW 06 LG
    Cover with lever
  • For enclosures with pegs
    • size 57.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    CLDL
    Polishing disc for POF and MOST contacts
    THCC 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CKA 03 CA
    Covers, with 2 pegs
  • for male inserts
    • size 44.27-CLSP
    Fibre stripper for POF fibre optic
    size 66.40-CCTPADF
    Positioner inserts female contacts 10A
    size 57.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    size 49.16mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    CRN 2
    Gaskets for ribbon cable hood
  • one slot for cable sizes 63.8 x 5.1 mm
    • C7ES
    Removal tool for 70A CX7 series contact
    CR 37 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 66.40 72-CRF
    Female coding and guide pin, for 72 codes
    size 104.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 77.62mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 104.62mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    5815GDC
    Cable clamps for series 07,103,104,07DC,17DC,47DC,77DC,104DC,101DC,117DC,147DC
    Cable diameter range: 4-14 mm
    size 104.62-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.62mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.62-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.62-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 104.62-CR 24 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • CHC 32 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 104.62mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.62mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 77.62-CRM
    Male double coding and guide pins, for 16 codes
    size 104.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.62-CLSP
    Fibre stripper for POF fibre optic
    size 104.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 77.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 77.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 104.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 77.62-CR GND
    Metal adaptor
    size 104.62-CRAD
    Straight cable clamping plate
    size 104.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 77.62-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.62-CLC4
    Polish paper grain size 4000
    size 77.62-CCTPACM
    Positioner inserts male contacts 16A
    size 104.27-CCVPP
    Pneumatic foot valve
    size 104.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.62-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 104.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.62mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 77.62-CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • size 104.27-CRAS
    Angled cable clamping plate
    size 77.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 104.27-CLDL
    Polishing disc for POF and MOST contacts
    size 77.62mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    Montrer 30 50 100 par page
    Précédente
    37 38 39 40 41