Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
55 56 57 58 59
Suivant
size 57.27-CDSHF 18
Insert, 18P+PE, Spring terminal connection
  • Female insert with female contacts
    • Type of connection: Spring clamp connection
    Rated current: 10 A
    Nominal rated voltage: 400 V
    Protection degree: IP20 without enclosure IP65/66/67/68 with enclosure
    RX-RX-H201SD-1190
    Header THT Tin plated Side entry
  • RX CONNECTOR
    • Number of contacts of range: 20-60
    Pitch/style: 2.54 mm
    PCB Mount Style: Through-hole Technology (THT)
    KR-SPH-002T-P0.5L
    Contact AWG 28 to 24
  • KR CONNECTOR
    • Pitch/style: 2.00 mm
    Applicable wire of range: AWG 28 to 24
    PCB Mount Style: Surface Mount Technology (SMT) Through-hole Technology (THT)
    CCVPP
    Pneumatic foot valve
    size 57.27-CRF
    Female double coding and guide pins, for 16 codes
    size 77.62-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 57.27-CHC 10 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • 604004900*
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 104.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • CZC 25 L
    Covers, with 2 pegs
  • For 1 lever enclosures
    • CKM 03 T1
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 2 with pole 3
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    size 57.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    600012700*
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    size 77.62-CRM
    Male double coding and guide pins, for 16 codes
    6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    size 104.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 49.16-CCPR RN
    Replacement tip for CCES removal tool
    CW 1 SC62
    SC duplex patch cord GL fibre G62,5/125 Orange
    size 57.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 6000114MA*
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 77.62-CLSP
    Fibre stripper for POF fibre optic
    6000347LA*
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    size 77.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    6000176CC
    Terminal block mounting plate for TH209 series for use with TH026 terminal block
    size 49.16mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.27mixo-CR 16 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 77.27 and Mixo frames for 4 inserts
    • CK 03 C
    Covers, with 2 pegs and gasket
  • For female inserts
    • size 57.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5mm
    • 6DB015700*
    additional cable retention
    size 77.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 49.16mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.27-CGCP 16 MB
    Dust protection cover for hoods high protection IP68
    size 104.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 6000219CC*
    Lock nuts
    • 14,0(h=21,0), CH 24,0 mm
    size 77.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 49.16mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.27-COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 104.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 57.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    size 77.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CZCS 15 LG
    Cover for electromagnetic compatibility with lever
  • For enclosures with pegs
    • THCC 16 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 600018200*
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 77.62-CR GND
    Metal adaptor
    size 32.13-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 57.27-CCTPADF
    Positioner inserts female contacts 10A
    size 104.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • CR..SSsize 57.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • 600012500*
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 77.62-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • AL M25IN
    Insulating black cable glan M25
    size 57.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62-CCTPACM
    Positioner inserts male contacts 16A
    size 57.27-COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • 604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    size 104.27-CCVPP
    Pneumatic foot valve
    size 66.16-CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27-CRAD
    Straight cable clamping plate
    size 77.62-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • 604001100
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    size 104.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 49.16-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CX 1/2 BDM
    Adaptor male insert, 1 seat for BUS connector and 2 seats for 10A male contacts
    Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27-CLC4
    Polish paper grain size 4000
    6000113MA*
    Grommets and reductions
    • 4 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 77.62-CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • 6000377GT
    Grommets and reductions
    • 1 hole Ø 3,4
    Cable diameter range: 2,5 - 3,5 mm
    size 104.27-CRAS
    Angled cable clamping plate
    size 49.16 72-CRM
    Male coding and guide pin, for 72 codes
    CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    6000091MA*
    blind grommet
    • white
    size 77.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 104.27-CLDL
    Polishing disc for POF and MOST contacts
    CLC4
    Polish paper grain size 4000
    size 77.27-CR GND
    Metal adaptor
    5815GDC
    Cable clamps for series 07,103,104,07DC,17DC,47DC,77DC,104DC,101DC,117DC,147DC
    Cable diameter range: 4-14 mm
    CKA 03 C
    Covers, with 2 pegs and gasket
  • For female inserts
    • size 57.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • 6000050EF
    Grommets and reductions
    • 2 holes Ø 1,2 mm
    Cable diameter range: 1,5 - 3,0 mm
    size 77.62mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 49.16mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 77.27mixo-CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • 604003900*
    Lock nuts
    • Spiral top Ø 12,5, CH 24,0 mm
    size 77.62mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 49.16mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CR 16 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 104.62mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    6000156LF*,**
    Blind reduction
    • Green
    CGC 16
    Covers for screw locking
  • Aluminium
    • size 104.62mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 57.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    600024200*,**
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 77.62-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 32.13-CCTPADM
    Positioner inserts male contacts 10A
    Montrer 30 50 100 par page
    Précédente
    55 56 57 58 59
    Suivant