Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
56 57 58 59 60
Suivant
size 77.27-CR SP
Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 104.62mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    600013700*
    blind grommet
    • yellow
    size 57.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 77.62mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    CGC 16 B
    Covers for bayonet locking
  • Aluminium
    • size 57.27-CHES
    Contact holder removal tool
    size 77.62-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    600013600*
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    600013700
    Blind grommet
    • Yellow
    size 32.13-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    CHC 16 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 104.62-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR 25 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
  • 25 poles
    • Protection degree: IP65
    size 77.62-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • 6DB00900C
    closure cap for TH405-406-409
    600012700*
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    6000113MA
    Grommets and reductions
    • 4 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 32.13-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 57.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.62CR..SC-CR 05...
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 57.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CHC 32 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • 600009600
    modules adapter for 5 poles version
    6000337BC
    special tool to fix the cable
    6000212CC
    Black nut for panel-mounting installation
    CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.62-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • 6000106MA*
    Grommets and reductions
    • 3 holes Ø 2,8 mm
    Cable diameter range: 2,0 -3,0 mm
    size 57.27-CHC 10 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    604003900
    Lock nuts, Spiral top Ø 12.5 mm
    • CH 24,0 mm
    CZC 25 SL
    Covers, with 2 pegs
  • For 1 lever enclosures
    • 6000302CC
    panel mounting clip
    604000100
    fischer ∅ 4,0 x 20,0 mm
    CKM 03 T3
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 1 with pole 2
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    size 77.62-CRF
    Female double coding and guide pins, for 16 codes
    6000085MM*
    Grommets and reductions
    • hole Ø 5,2 mm
    Cable diameter range: 5,5 - 7,0 mm
    size 104.27 72-CRF
    Female coding and guide pin, for 72 codes
    6000346LA
    Blind reduction
    • Natural
    size 49.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.27mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.62-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • THCW 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 7.010.9S0.783
    Brass protective cap with chain
    • For connectors with female thread
    02-0273-000
    Screwing for tube
    6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0mm (h=21,0mm)
    CHCN 24
    Covers with pegs
  • Aluminium
    • size 104.62-CLC1
    Polish paper grain size 1000
    size 44.27-CCTPADF
    Positioner inserts female contacts 10A
    08-2676-000-000
    Protection cap for male panel mount connector
    • IP67
    Protection degree: IP67
    6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • C7 24 FL-N
    Frames for bulkhead mounting housings
    size 44.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 104.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    08-0426-000-000
    Protection cap for female cable connector
    6000042LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 6.0 mm cables
    CR 06 LN
    Spare part lever for enclosures with levers
    size 77.27-CCTPACF
    Positioner inserts female contacts 16A
    CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • size 104.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 66.40-CCW M25
    Punching nut for M25 hole
    08-1200-040-025
    Earth sleeve with seal
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    TCHC 06 LG
    Covers with thermoplastic lever and gasket
  • With loop
    • size 77.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 44.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 104.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    CCW CT
    Hydraulic punching tool
    6000089MA
    Grommets and reductions
    • 2 holes Ø 3,0 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 66.40-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    M23H-7.010.900.128
    Adaptor flange for Straight Connectors
    size 44.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    02-0054-000
    Protection cap for male panel mount connector
    CHCW 50
    Cover with 4 pegs
  • For housings with 2 levers
    • size 77.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    M23power-7.010.9S4.102
    Stainless steel protective cap
    • For connectors with male thread
    • with rope, length 100 mm
    61-0891-139
    Male contact (PU=100pcs) signal
    • Only for 8 pole HEC connector
    6DB000800
    Double grommet
    • hole Ø 8 mm
    Cable diameter range: 7,0 - 8,5 mm
    size 44.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    08-2674-000-000
    Protection cap for male panel mount connector
    • M20
    size 66.16-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • 7.000.900.902
    Crimp tool for manual crimping of machined crimp contacts up to 10 mm² (AWG 8)
    • For power connectors
    08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    6000212CC
    Lock nuts for M25
    • 32,0 mm
    CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • 08-2965-000-000
    Protection cap for cable connectors
    size 77.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 104.62-CCVPP
    Pneumatic foot valve
    M23power-7.010.900.183
    Brass protective cap
    • For connectors with female thread
    08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    6000286CA
    supporting frame with snap-in max ∅ 8.5 mm
    size 104.27-CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • Montrer 30 50 100 par page
    Précédente
    56 57 58 59 60
    Suivant