Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
61 62 63 64 65
Suivant
04-0734-124
Shielding sheet for panel mount connectors
  • Fastened from back side
  • PG 9
CDMA 6A
6A male contacts for male inserts with terminal Ø 1mm
Type of connection: Crimp connection
Rated current: 6 A
size 104.27mixo-CYD 35 C
Crimp matrixes for CY contacts section 25 mm² and 35 mm²
CCW M25
Punching nut for M25 hole
600018200
Grommets and reductions
  • 4 holes Ø 3,3 mm
Cable diameter range: 2,0 - 3,5 mm
CHCW 06 L
Cover with pegs
  • For 1 lever enclosures
    • CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • 604004900*
    Grommets and reductions
    • hole Ø max 14,0 mm
    08-0472-000-000
    PCB with one LED yellow
    • For cable connectors, screw termination
    size 44.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 66.16-CCW CT
    Hydraulic punching tool
    604001100
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    size 66.40-CCTPACM
    Positioner inserts male contacts 16A
    size 77.27-CRM
    Male double coding and guide pins, for 16 codes
    600012700*
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    08-2424-010-000
    Protection cap for male cable connector
    • IP67
    Protection degree: IP67
    CYPZ LOC
    Locator for CY contacts
    size 104.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • 6000086MH
    Grommets and reductions
    • hole Ø 3,0 mm
    Cable diameter range: 4,0 - 5,5 mm
    size 66.40 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • 6000089MA*
    Grommets and reductions
    • 2 holes Ø 3,0 mm
    Cable diameter range: 2,0 - 3,5 mm
    6000346LA*
    Blind Reduction
    • Natural
    600037000
    Grommets and reductions
    • hole Ø 5,3 mm
    Cable diameter range: 5,0 - 6,5 mm
    61-0896-139
    Female contact (PU=100pcs)
    size 44.27mixo-CITP D
    Turret head for CI contacts
    size 66.16-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    6000194CC
    Terminal block mounting plate for TH211 series
    6DB015700
    additional cable retention
    08-1204-000-000
    Protection cap for coupling and panel mount connectors
    • IP40
    Protection degree: IP40
    size 44.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    size 66.16 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 104.62-CCTPADM
    Positioner inserts male contacts 10A
    6DB015700*
    additional cable retention
    6000041LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    08-2671-000-000
    Protection cap for female panel mount connector
    • IP67
    Protection degree: IP67
    size 44.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CRZ 24
    24 pole closure or reduction plate
  • In self-extinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    size 77.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 104.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 6000219CC*
    Lock nuts
    • 14,0(h=21,0), CH 24,0 mm
    6DB00750C
    modules adapter for 6 poles version
    08-2606-000-001
    Adapter for a cable-cable connection to mate a panel mount connector
    • Cable outlet 4-6 mm, 6-8 mm, sealings enclosed
    size 44.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 104.27-CR 24 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • WTC-1307-1
    Wire termination tool
  • For part number 1307
    • size 104.62-CRIC M3
    Panel fitted insert fastening screws
    6000087LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    TCHC 10
    Covers with 4 pegs
  • Plastic,with eyelet
    • 6000269CC
    Lock nuts
    • CH 24,0 mm, 11,0mm
    08-2559-000-000
    Protection cap for male panel mount connector
    CX CFM
    Lock-in tabs for modular units (6units) dividable
    CGC 24
    Covers for screw locking
  • Aluminium
    • size 104.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    600022400
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    08-2615-000-000
    Protection cap for male panel mount connector
    Protection degree: IP67
    size 44.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    08-2831-000-000
    Protection cap for female panel mount connector
    Connector diameter: 11.5 mm
    CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CHC 24 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 104.62mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    600012500*
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    08-2989-000-000
    Protection cap for male panel mount connector
    • Front fastened
    • 11 mm
    Protection degree: IP67
    size 44.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CCW PD 24
    Punching units for panel cut out of bulkhead mounting houdings
    6000040LF*,**
    blind reduction
    • Green
    CG 06 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 77.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    PK-VR
    Polarizing key
  • Accessories VR CONNECTOR
    • Pitch/style: 3.96 mm
    PCB Mount Style: Through-hole Technology (THT)
    08-2989-000-000
    Protection cap for male panel mount connector
    • Front fastened
    • 11 mm
    Protection degree: IP67
    CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • size 104.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 49.16-CCW M25
    Punching nut for M25 hole
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    C7 06 FL-N
    Frames for bulkhead mounting housings
    size 77.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 604001100*
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    08-2769-000-000
    Protection cap for female connector
    • IP67
    Protection degree: IP67
    size 44.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 104.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • AT U3F
    RJ45/USB/LC Connectors for ATR C22
  • USB 3.0 coupler F-F Type A
    • 6000114MA
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.27-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • 6000113MA*
    Grommets and reductions
    • 4 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    6000365GT
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    6000225ME
    Grommets and reductions
    • hole Ø 6,5 mm
    Cable diameter range: 6,0- 7,0 mm
    08-2842-000-000
    Protection cap for male panel mount connector
    CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    7.000.900.901
    Crimp tool for manual crimping of machined crimp contacts
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    CZCS 15 L
    Cover for electromagnetic compatibility with pegs
  • For 1 lever enclosures
    • THCH 16 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • Montrer 30 50 100 par page
    Précédente
    61 62 63 64 65
    Suivant