Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
64 65 66 67 68
Suivant
08-1200-040-025
Earth sleeve with seal
6000086MH*
Grommets and reductions
  • hole Ø 3,0 mm
Cable diameter range: 4,0 - 5,5 mm
size 77.27mixo-CXTP 40 F
Turret heads for female contacts 40A
size 104.62-CCPNP
"go /no go" control gauge to verify indenter closure
6DB00750C
modules adapter for 6 poles version
size 44.27-CR GND
Metal adaptor
CR 24 SS
Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • WTW-1293
    Wire termination tool
  • For part number 1293
    • 6000302CC
    panel mounting clip
    size 104.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • TCHC 10 S
    Covers with 4 pegs
  • Plastic,with loop
    • 6000269CC
    Lock nuts
    • CH 24,0 mm, 11,0mm
    size 44.27mixo-CR 06 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CGC 24 B
    Cover for bayonet locking
  • Aluminium
    • 02-0054-000
    Protection cap for male panel mount connector
    6000219CC*
    Lock nuts
    • 14,0(h=21,0), CH 24,0 mm
    size 104.62mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 44.27-CCTPACF
    Positioner inserts female contacts 16A
    61-0891-139
    Male contact (PU=100pcs) signal
    • Only for 8 pole HEC connector
    6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    CR 06 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • CHC 24 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • 08-2674-000-000
    Protection cap for male panel mount connector
    • M20
    6000087LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    size 104.62mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 44.27-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 104.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    6000040LF*,**
    blind reduction
    • Green
    CHCN 06 L
    Covers with pegs
  • Aluminium
    • size 77.27-CCVPP
    Pneumatic foot valve
    08-2965-000-000
    Protection cap for cable connectors
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 44.27-CRIC M3
    Panel fitted insert fastening screws
    size 104.27mixo-CGPZ LOC
    Locator for CG contacts
    08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    size 57.27-CCW M25
    Punching nut for M25 hole
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    TCHC 06 L
    Covers with pegs
  • With eyelet
    • size 77.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 44.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 104.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • 08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    AT LCMM
    RJ45/USB/LC Connectors for ATR C22
  • LC-Duplex adapter MM
    • 6000114MA
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 66.40-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 77.27-CRAD
    Straight cable clamping plate
    604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    6000142MC
    Grommets and reductions
    • hole Ø 7,0 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 44.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    01-5322-001
    Ring nut for fixing thread
    • PG 9
    • 14 mm
    CHC 50 S
    Covers with 4 pegs
  • For enclosures with 2 levers
    • size 77.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    604001100*
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    6DB000800
    Double grommet
    • hole Ø 8 mm
    Cable diameter range: 7,0 - 8,5 mm
    size 44.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 104.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    08-2841-000-000
    Protection cap for female cable connector
    604001100*
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    size 66.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.27mixo-CYPZ LOC
    Locator for CY contacts
    6DB025200
    Closure cap for THx.391.Lxx/THx.391.Txx
    CR..SSsize 57.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 77.62-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 7.010.900.110
    Assembly tool
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    AL M25IN
    Insulating black cable glan M25
    size 57.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62-CCTPACM
    Positioner inserts male contacts 16A
    6DB015700
    additional cable retention Only for 24.0 mm
    size 57.27-COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 104.27-CCVPP
    Pneumatic foot valve
    M23-7.000.900.101
    Plastic protective cap
    • For connectors with male/female thread
    size 66.16-CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • 604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27-CRAD
    Straight cable clamping plate
    size 77.62-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • 6DB00750C
    modules adapter for 6 poles version
    size 104.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 7.010.9S0.704
    Brass protective cap with chain
    • For connectors with male thread
    size 49.16-CCSPZP
    Support for CCPZP pneumatic crimping tool
    6DB021900
    Closure cap for THx.387.Axx/THx.387.Exx/THx.387.Lxx
    CX 1/2 BDM
    Adaptor male insert, 1 seat for BUS connector and 2 seats for 10A male contacts
    Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27-CLC4
    Polish paper grain size 4000
    size 77.62-CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • 6DB01580C
    sealing cap with silicon belt for TH385
    size 104.27-CRAS
    Angled cable clamping plate
    size 49.16 72-CRM
    Male coding and guide pin, for 72 codes
    6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0 mm (h=21,0 mm)
    size 104.27-CLDL
    Polishing disc for POF and MOST contacts
    CLC4
    Polish paper grain size 4000
    6DB015700*
    additional cable retention Only for CH 24,0 mm
    size 77.27-CR GND
    Metal adaptor
    5815GDC
    Cable clamps for series 07,103,104,07DC,17DC,47DC,77DC,104DC,101DC,117DC,147DC
    Cable diameter range: 4-14 mm
    Montrer 30 50 100 par page
    Précédente
    64 65 66 67 68
    Suivant