Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
66 67 68 69 70
Suivant
M23signal-7.010.9S4.102
Stainless steel protective cap
  • For connectors with male thread
  • with rope, length 100 mm
600024500*
Grommets and reductions
  • hole Ø max 11,8 mm
Cable diameter range: 9,5 - 13,0 mm
size 49.16mixo-CXES-10
Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 77.27-CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 104.62mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • 600012500*
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 77.62mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • 08-2673-000-000
    Protection cap for female panel mount connector
    • IP67
    Protection degree: IP67
    7.010.900.214
    Adaptor for Conduit Fittings
    600012600
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 49.16mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    CYG 16
    Enclosures for in-line joints IP65
  • Without housings made in two halves
    • Material housing: Aluminium
    Protection degree: IP65
    size 104.62-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 57.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    08-0045-000-001
    Rectangular flange for panel mount connectors
    M23power-7.000.900.101
    Plastic protective cap
    • For connectors with male/female thread
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    COB L
    Levers for coupling with metallic enclosures
  • Kit with 2 element, to be mounted instead of the standard levers to be coupled with: COB TCQ and COB..BC
    • CR 16 BPE
    PE jumpers
  • Galvanised brass
    • size 77.62-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000302CC
    panel mounting clip
    04-0106-001
    Rectangular flange for panel mount connectors
    7.010.900.103
    Brass protective cap
    • For connectors with female thread
    604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 32.13-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 57.27-CCTPADM
    Positioner inserts male contacts 10A
    08-3128-000-000
    Dummy Plug
    • PG9/M16 x 1,5
    CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • size 77.62-CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 6DB00750C
    modules adapter for 6 poles version
    07-0010-001
    Mounting spanner for panel mount connectors
    7.010.9S0.705
    Brass protective cap with chain
    • For connectors with female thread
    600025900
    sealing cap
    CQ 08 C
    Covers with 2 pegs
  • Thermoplastic resin cable glands
    • size 57.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62-CCTPADF
    Positioner inserts female contacts 10A
    08-2425-010-000
    Protection cap for female cable connector
    Protection degree: IP67
    size 57.27-COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 104.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 600012200
    modules adapter for 3 poles version
    08-0350-000-001
    Protection cap for female cable connector
    • IP67
    Protection degree: IP67
    size 66.16-CR VDTG
    Screws for second earth terminal
  • For C15/25 & CDD 38 inserts
    • 6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 57.27-CRAS
    Angled cable clamping plate
    size 77.62-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • 01-5322-001
    Ring nut for fixing thread
    • PG 9
    • 14 mm
    size 104.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0 mm (h=21,0 mm)
    size 49.16-CCVPP
    Pneumatic foot valve
    6DB015700*
    additional cable retention Only for CH 24,0 mm
    CRIC M3
    Panel fitted insert fastening screws
    size 57.27-CLDL
    Polishing disc for POF and MOST contacts
    size 77.62-CRIC M3
    Panel fitted insert fastening screws
    01-5322-001
    Ring nut for fixing thread
    • PG 9
    • 14 mm
    size 104.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    size 49.16 72-CRF
    Female coding and guide pin, for 72 codes
    6000115KC*
    Lock nuts
    • round,7,5 mm,CH 19,0 mm
    size 21.21-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 57.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 77.62mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    16-0959-000
    Sealing for square flange
    • Metal version
    7.000.900.907
    Manual Crimp tool for turned contacts M23 fast Ethernet PoE
    size 104.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CLDL
    Polishing disc for POF and MOST contacts
    size 77.27-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    5850GDC
    Cable clamps for series 07,103,104,07DC,17DC,104DC,117DC
    Cable diameter range: 8-16 mm
    6000042LF*, **
    cable reduction suggested for silicon-rubber and ∅ ≤ 6,0 mm cables
    CKA 03 CA
    Covers, with 2 pegs
  • for male inserts
    • size 57.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.62mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    07-0085-000
    Mounting tool for M8 locking ring
    • 0,4 Nm
    M16cordsets-7.010.9S0.705
    Brass protective cap with chain
    • For connectors M16 with female thread
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    size 49.16mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    600018200*
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 57.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • 61-0891-139
    Male contact (PU=100pcs)
    M23power-7.010.904.103
    Stainless steel protective cap
    • For connectors with female thread
    600022400
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 49.16mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 104.62mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    600013700*
    blind grommet
    • yellow
    size 57.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 77.62mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    08-1203-000-000
    Protection cap for cable connectors
    • IP40
    Protection degree: IP40
    7.000.9DM.C06
    Locator for Crimp Tool DMC M22520 with positioner
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    CGC 16 B
    Covers for bayonet locking
  • Aluminium
    • size 57.27-CHES
    Contact holder removal tool
    size 77.62-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    08-1080-000-000
    Protection cap for female panel mount connector
    • IP67
    Protection degree: IP67
    7.000.9DM.C03
    Locator for Crimp Tool DMC M22520 with positioner
    600013700
    Blind grommet
    • Yellow
    size 32.13-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    Montrer 30 50 100 par page
    Précédente
    66 67 68 69 70
    Suivant