Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
68 69 70 71 72
Suivant
size 21.21-CJST
Cable stripper, cuts the cable steath and releases the wires in a single operation
size 57.27mixo-CYD 50 C
Crimp matrixes for CY contacts section 50mm²
size 77.62mixo-ZFU-CD
Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
size 104.27-CLES
Removal tool for the extraction of contacts from the CX L inserts
CLDL
Polishing disc for POF and MOST contacts
size 77.27-CX 8/2 JF
RJ 45 female connector with 8 data contacts
Type of connection: Crimp connection
Rated current: 1 A
Nominal rated voltage: 50 V
7.010.9S0.707
Brass protective cap with chain
  • For connectors with female thread
5850GDC
Cable clamps for series 07,103,104,07DC,17DC,104DC,117DC
Cable diameter range: 8-16 mm
600013700
Blind grommet
  • Yellow
CKA 03 CA
Covers, with 2 pegs
  • for male inserts
    • size 57.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.62mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    6DB015700
    additional cable retention Only for 24.0 mm
    size 49.16mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    M23RJ45-7.010.900.204
    Adaptor for Conduit Fittings
    604001100
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    size 57.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • 6DB00750C
    modules adapter for 6 poles version
    size 49.16mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 104.62mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    7.000.980.161
    Plastic protective cap
    • For connectors with male/female thread
    6DB02180C
    Closure cap for THx.387.Dxx
    size 57.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 77.62mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    6000183CC
    sealing cap
    CGC 16 B
    Covers for bayonet locking
  • Aluminium
    • 6000338GT
    blind grommet
    • Green
    size 57.27-CHES
    Contact holder removal tool
    size 77.62-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    6000269CC
    Lock nuts
    • CH 24,0 mm, 11,0 mm
    size 32.13-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    CHC 16 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 104.62-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    604003900*
    Lock nuts
    • spiral top ∅ 12,5 mm, CH 24,0 mm
    CR 25 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
  • 25 poles
    • Protection degree: IP65
    size 77.62-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • 6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    size 32.13-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 57.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.62CR..SC-CR 05...
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • 6002002CC
    Lock nuts
    • round,7,5 mm
    size 57.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CHC 32 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • 7.010.900.144
    Multi-bus I, Female Thread, Pins 17 pole Multi-bus II, Male Thread, Sockets
    6000338GT
    Blind grommet
    • Green
    CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.62-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • 6000040LF*, **
    blind reduction
    • green
    size 57.27-CHC 10 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    CZC 25 SL
    Covers, with 2 pegs
  • For 1 lever enclosures
    • M16cordsets-7.010.900.163
    Brass protective cap
    • For connectors M16 with female thread
    600024500*
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    CKM 03 T3
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 1 with pole 2
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    size 77.62-CRF
    Female double coding and guide pins, for 16 codes
    600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 104.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 49.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • M23signal-7.010.900.127
    Assembly tool
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    CWK 10 J2M8
    Patch cord with 2 RJ45 connectors, male inserts
  • 8 data contacts, in insulating enclosure
    • Protection degree: IP65
    size 57.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 77.62-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    604004900*
    Grommets and reductions
    • hole Ø max 14,0 mm
    6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0mm (h=21,0mm)
    CHCN 24
    Covers with pegs
  • Aluminium
    • 08-1202-001-001
    Protection cap for panel mount connectors with outer thread
    • IP67
    Protection degree: IP67
    600012700*
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    size 104.62-CLC1
    Polish paper grain size 1000
    size 44.27-CCTPADF
    Positioner inserts female contacts 10A
    6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • C7 24 FL-N
    Frames for bulkhead mounting housings
    08-1078-000-000
    Protection cap for female cable connector
    • IP67
    Protection degree: IP67
    6000114MA*
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 44.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 104.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    6000347LA*
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    6000042LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 6.0 mm cables
    CR 06 LN
    Spare part lever for enclosures with levers
    size 77.27-CCTPACF
    Positioner inserts female contacts 16A
    08-2679-000-001
    Protection cap for panel mount connectors
    • IP67
    Protection degree: IP67
    6000176CC
    Terminal block mounting plate for TH209 series for use with TH026 terminal block
    CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • size 104.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 66.40-CCW M25
    Punching nut for M25 hole
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    16-0403-001
    Hexagonal nut for fixing thread
    • PG 11
    TCHC 06 LG
    Covers with thermoplastic lever and gasket
  • With loop
    • size 77.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • 6DB015700*
    additional cable retention
    size 44.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 104.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    CCW CT
    Hydraulic punching tool
    6000089MA
    Grommets and reductions
    • 2 holes Ø 3,0 mm
    Cable diameter range: 2,0 - 3,5 mm
    07-0079-000
    Hexagon torque spanner
    • SW 18, 0,6 Nm, for 713 series
    Montrer 30 50 100 par page
    Précédente
    68 69 70 71 72
    Suivant