Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
69 70 71 72 73
Suivant
CX 4E JM
RJ45 male connector, 4 data contacts cat. 5e profiNET
Type of connection: Crimp connection
Rated current: 1 A
Nominal rated voltage: 50 V
6000269CC
Lock nuts
  • CH 24,0 mm, 11,0 mm
size 77.62-CR CPQ
Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
CHCW 16
Cover with 4 pegs
  • For enclosures with 2 levers
    • 604003900*
    Lock nuts
    • spiral top ∅ 12,5 mm, CH 24,0 mm
    size 104.27-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 49.16mixo-CCTPADM
    Positioner inserts male contacts 10A
    08-2559-000-000
    Protection cap for male panel mount connector
    CK 03 CX
    Covers, with lever and gasket
  • For female inserts
    • 6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    size 77.62-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 57.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6002001CC*
    Lock nuts
    • CH 19,0 mm, 9,5 mm
    size 104.27-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • 08-2615-000-000
    Protection cap for male panel mount connector
    Protection degree: IP67
    5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • CHCP 10
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • 08-2831-000-000
    Protection cap for female panel mount connector
    Connector diameter: 11.5 mm
    7.010.900.143
    Multi-bus I, Female Thread, Sockets 17 pole Multi-bus II, Male Thread, Pins
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 6000338GT
    Blind grommet
    • Green
    size 77.62mixo-CCTPACM
    Positioner inserts male contacts 16A
    5815GDC
    Cable clamps for series 07,103,104,07DC,17DC,47DC,77DC,104DC,101DC,117DC,147DC
    Cable diameter range: 4-14 mm
    size 57.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • 6000040LF*
    blind reduction
    • green
    08-2989-000-000
    Protection cap for male panel mount connector
    • Front fastened
    • 11 mm
    Protection degree: IP67
    size 49.16mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 57.27-CYG 06H06D
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "57.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    M23cordsets-7.000.900.101
    Plastic protective cap
    • For connectors M23
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    600024500*
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    size 77.62mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 57.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • 600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    08-2989-000-000
    Protection cap for male panel mount connector
    • Front fastened
    • 11 mm
    Protection degree: IP67
    size 49.16-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • CHCR 10
    Cover with 4 pegs
  • For housings
    • M16-7.010.900.127
    Assembly tool
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 77.62mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 57.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • 08-2769-000-000
    Protection cap for female connector
    • IP67
    Protection degree: IP67
    size 32.13-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • M23power-7.010.9S0.783
    Brass protective cap with chain
    • For connectors with female thread
    CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • 600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 57.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    THCW 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • 08-2842-000-000
    Protection cap for male panel mount connector
    CR 08 EMC
    Conductive gasket for CQM male inserts
    6000302CC
    panel mounting clip
    size 104.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    M23-7.010.9S0.702
    Brass protective cap with chain
    • For connectors with male thread
    size 44.27-CLC1
    Polish paper grain size 1000
    600012700
    Grommet and reductions
    • slot 11,0 mm x 5,5 mm, Yellow
    size 77.62-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 66.40-CCSPZP
    Support for CCPZP pneumatic crimping tool
    08-2302-000-000
    Protection cap for female panel mount connector
    • IP67
    Protection degree: IP67
    CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • 6DB00400C
    modules adapter for 6 poles version with silicon belt
    size 104.62-CR GND
    Metal adaptor
    size 77.27mixo-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • 7.010.900.200
    Conduit Adaptor
    CX7PZ LOC
    Locator for CX7 contacts
    6000091MA
    Blind grommet
    • white
    size 77.62mixo-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 49.16-CCTPACM
    Positioner inserts male contacts 16A
    size 57.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    CHCW 50 G
    Covers with 2 levers
  • For enclosures with 4 pegs
    • 04-0186-009
    Solder eye ring
    CR K04R
    Plain coding pin for CK/CKS 04 inserts
  • Red
    • 600012200
    modules adapter for 3 poles version
    size 104.62-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.27-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 44.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • 6000346LA
    blind reduction
    • Natural
    size 104.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 49.16-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 66.16-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    04-0183-009
    Solder eye ring
    CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • 6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0 mm (h=21,0 mm)
    size 77.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CG 16 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 44.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    601000500
    screw ∅ 2,9 x 25,0 mm for box fixing
    size 104.27-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    CLSP
    Fibre stripper for POF fibre optic
    size 57.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    04-0106-001
    Rectangular flange for panel mount connectors
    CKAX 03 CX
    Covers, with stainless steel lever and gasket
  • For female inserts
    • Montrer 30 50 100 par page
    Précédente
    69 70 71 72 73
    Suivant