Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
71 72 73 74 75
Suivant
6000269CC*
Lock nuts
  • 11,0 mm, CH 24,0 mm
CX 8 J6M
RJ45 male IDC connector
  • 8 data contacts
    • size 77.62-CLC4
    Polish paper grain size 4000
    size 104.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    6000340GT
    Grommets and reductions
    • 2 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    M16-7.010.9S4.103
    Stainless steel protective cap
    • For connectors with female thread
    • with rope, length 100 mm
    CLSP
    Fibre stripper for POF fibre optic
    size 77.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000041LF*, **
    cable reduction suggested for silicon-rubber and ∅ ≤ 7,5 mm cables
    CKAX 03 CX
    Covers, with stainless steel lever and gasket
  • For female inserts
    • size 57.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 77.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    7.000.900.152
    Plastic protective cap
    • For connectors with female thread
    size 49.16mixo-C7ES
    Removal tool for 70A CX7 series contact
    8709 P
    Fitting connection boards for 1:1 link (pin/socket)
    Number of contacts of range: 9-25
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 57.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.62mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • 600024200*
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    7.000.980.167
    Plastic protective cap
    • For connectors with male/female thread
    size 49.16mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • CR..SSsize 77.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 104.62mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • 600013600*
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    size 57.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • 600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    7.010.9S0.783
    Brass protective cap with chain
    • For connectors with female thread
    CHCN 16 G
    Covers with 2 levers
  • Aluminium
    • size 57.27-CR GND
    Metal adaptor
    600013700
    Blind grommet
    • Yellow
    CZC 15 LG
    Covers with lever
  • For enclosures with pegs
    • TCHC 16 S
    Covers with 4 pegs
  • Plastic, with loop
    • size 104.62-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    08-0425-000-000
    Protection cap for male cable connector
    6DB020500
    Grommets and reductions
    • hole Ø 9,0 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 44.27mixo-CGPZ LOC
    Locator for CG contacts
    size 104.27mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 66.16-CCTPADM
    Positioner inserts male contacts 10A
    size 77.27-CLC4
    Polish paper grain size 4000
    604003900*
    Lock nuts
    • Spiral top Ø 12,5, CH 24,0 mm
    08-1205-000-000
    Mounting spanner
    6DB000800
    Double grommet
    • hole Ø 8 mm
    Cable diameter range: 7,0 - 8,5 mm
    size 44.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 104.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 66.16-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    6000156LF*
    Blind reduction
    • Green
    08-2668-000-001
    Blind plug
    • IP67
    Protection degree: IP67
    6002002CC
    Lock nuts
    • round, 7,5mm
    size 77.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 104.62-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    6DB015700
    additional cable retention Only for 24.0 mm
    size 44.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR 24 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 104.27 and Mixo frames for 6 inserts
    • ZPT92-110
    Hand insertion tools
    size 77.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 104.62-CRM
    Male double coding and guide pins, for 16 codes
    600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    CR 10 BPE
    PE jumpers
  • Galvanised brass
    • 08-2680-000-000
    Protection cap for male panel mount connector
    • M12
    604003900
    spiral top ∅ 12.5 mm
    • CH 24,0 mm
    size 104.27-COB TCQ
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
    J5KP-VY
    Keying Plug for JFA Connector J5000 series
  • Accessories JFA CONNECTOR J5000 series
    • Pitch/style: 11.00 mm
    size 104.62-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    600013700*
    Blind Grommet
    • Yellow
    CHC 10
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • 01-5059-001
    Mounting spanner
    6000347LA
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • TCHC 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 08-2425-010-000
    Protection cap for female cable connector
    Protection degree: IP67
    size 104.62mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 44.27-CCPR RN
    Replacement tip for CCES removal tool
    size 104.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • 6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    CYG 06H06
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27-CCTPADM
    Positioner inserts male contacts 10A
    604004900*
    Grommets and reductions
    • hole Ø max 14,0 mm
    08-2425-010-000
    Protection cap for female cable connector
    Protection degree: IP67
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CRAS
    Angled cable clamping plate
    size 104.27mixoCY-CGD 25...
    Crimp matrixes for CY contacts section 16mm²
    size 104.27-CCW M25
    Punching nut for M25 hole
    600012600
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    THCC 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 77.27-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    6000090MA*
    Grommets and reductions
    • 1 hole Ø 2,0 mm
    Cable diameter range: 1,0 - 3,0 mm
    16-0402-001
    Hexagonal nut for fixing thread
    • PG 9
    6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    size 44.27-CLDL
    Polishing disc for POF and MOST contacts
    size 104.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 49.16-CCW CT
    Hydraulic punching tool
    6000113MA
    Grommets and reductions
    • 4 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 66.40-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.27-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    6000084MG*
    Grommets and reductions
    • hole Ø 7,0 mm
    Cable diameter range: 7,0 - 9,0 mm
    Montrer 30 50 100 par page
    Précédente
    71 72 73 74 75
    Suivant