Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
73 74 75 76 77
Suivant
6000340GT
Grommets and reductions
  • 2 holes Ø 3,4 mm
Cable diameter range: 2,5 - 3,0 mm
CR 06 AT
Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHC 24 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • size 77.62mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • 6DB00200C
    sealing cap with silicon belt for TH384
    size 44.27-CR CP
    Plain coding pin for CD and CDD inserts
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    size 104.27mixo-CCVPP
    Pneumatic foot valve
    size 104.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • 600024500*
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    CGC 06 B
    Cover for bayonet locking
  • Aluminium
    • size 77.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • 02-0054-000
    Protection cap for male panel mount connector
    6000269CC
    Lock nuts
    • CH 24,0 mm, 11,0 mm
    size 44.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • 604003900*
    Lock nuts
    • spiral top ∅ 12,5 mm, CH 24,0 mm
    size 104.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 104.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    61-0891-139
    Male contact (PU=100pcs) signal
    • Only for 8 pole HEC connector
    600013700
    blind grommet
    • yellow
    CHC 06 LC
    Covers with pegs and gasket
  • For hoods with lever
    • size 77.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    08-2674-000-000
    Protection cap for male panel mount connector
    • M20
    6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    size 44.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    6002002CC*
    Lock nuts
    • round,7,5 mm
    size 104.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.62-CR GND
    Metal adaptor
    08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    6000090MA
    Grommets and reductions
    • 1 hole Ø 2,0 mm
    Cable diameter range: 1,0 - 3,0 mm
    size 66.40-CRIC M3
    Panel fitted insert fastening screws
    size 77.27-CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • size 77.62mixo-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 08-2965-000-000
    Protection cap for cable connectors
    7.010.900.145
    Control Cabinet adapter for Multibus II - AIDA
    • Rear Mounting
    • Central Locking
    6000338GT
    Blind grommet
    • Green
    6DB020500
    Grommets and reductions
    • hole Ø 9,0 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 44.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • 6000040LF*, **
    blind reduction
    • green
    size 104.62-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    size 66.16-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.27-CLDL
    Polishing disc for POF and MOST contacts
    size 104.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    M23cordsets-7.010.900.103
    Brass protective cap
    • For connectors M23 with female thread
    6000040LF*,**
    Blind reduction
    • green
    6DB000800
    Double grommet
    • hole Ø 8 mm
    Cable diameter range: 7,0 - 8,5 mm
    size 44.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • 600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 104.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    08-2616-000-000
    Protection cap for female panel mount connector
    Protection degree: IP67
    size 66.16-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 104.27-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    M23power-7.010.900.127
    Assembly tool
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    6000046CC
    Lock nuts for M16/PG9
    • 22,0 mm
    KT KB
    Cable bushing for series 17,47
    Cable diameter range: 2-9 mm
    size 104.27mixo-CR 24 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • size 77.62-CRAS
    Angled cable clamping plate
    01-5322-001
    Ring nut for fixing thread
    • PG 9
    • 14 mm
    size 77.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 104.27-CRM
    Male double coding and guide pins, for 16 codes
    M23power-7.000.900.901
    Crimp tool for manual crimping of machined crimp contacts
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    6DB015700
    additional cable retention Only for 24.0 mm
    size 44.27-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CHCP 24
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • size 77.62-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    08-2841-000-000
    Protection cap for female cable connector
    size 77.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • M23-7.000.900.904
    Crimp tool for manual crimping of machined crimp contacts
    • For signal connectors
    CHCW 10
    Cover with 4 pegs
  • For enclosures with 2 levers
    • 600012700
    Grommet and reductions
    • slot 11,0 mm x 5,5 mm, Yellow
    604003900
    spiral top ∅ 12.5 mm
    • CH 24,0 mm
    size 104.27-COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 77.62mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    04-0722-000
    Flat seal for panel mount connectors
    6000049CC
    closure cap for TH405-406-409
    7.000.848.101
    Plastic protective cap for TWINTUS
    CHC 10 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • 6000114MA
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    6000347LA
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    CR..SS-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • THCW 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 77.62mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • 01-0010-001
    Ring nut for fixing thread
    • With knurled screw
    600012200
    modules adapter for 3 poles version
    size 44.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • 6000336BC
    Lock nut
    • ring for panel mounting
    size 104.27-CLC1
    Polish paper grain size 1000
    size 104.62mixo-CXTP 40 M
    Turret heads for male contacts 40A
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    CYG 06H06D
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "57.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.62mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    01-0010-001
    Ring nut for fixing thread
    • With knurled screw
    604003900
    Lock nuts, Spiral top Ø 12.5 mm
    • CH 24,0 mm
    Montrer 30 50 100 par page
    Précédente
    73 74 75 76 77
    Suivant