Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
74 75 76 77 78
Suivant
size 104.62mixo-CR 24 ST
Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 6002002CC*
    Lock nuts
    • round,7,5 mm
    size 57.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • CHC 32 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • 7.010.900.146
    I/O adapter module to scan or feed signals
    • Rear Mounting
    • Central Locking
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CCTPACM
    Positioner inserts male contacts 16A
    size 57.27-CR 72
    Single coding and guide pin, for 72 codes
    size 77.62-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • 600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    6002001CC*
    Lock nuts
    • CH 19,0 mm, 9,5 mm
    size 104.27mixo-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 08-2424-010-000
    Protection cap for male cable connector
    • IP67
    Protection degree: IP67
    size 77.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 104.62-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • 600013600*
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    6DB01430C
    closure cap with silicon belt
    size 44.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR..SSsize 104.27-CR 05...
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • ZPT81-A
    Hand insertion tools
    61-0896-139
    Female contact (PU=100pcs)
    size 77.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 104.62-CR 20
    Single code pins for 6 codings
    THCC 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 600012700
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    604003800
    spiral top ∅ 8.5 mm
    • CH 19,0 mm
    CR LN
    Spare part lever for enclosures with levers
    08-1204-000-000
    Protection cap for coupling and panel mount connectors
    • IP40
    Protection degree: IP40
    size 104.62-CLDL
    Polishing disc for POF and MOST contacts
    size 44.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    6000347LA*
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • TCHC 24 S
    Covers with 4 pegs
  • Plastic, with loop
    • 08-2671-000-000
    Protection cap for female panel mount connector
    • IP67
    Protection degree: IP67
    6000089MA*
    Grommets and reductions
    • 2 holes Ø 3,0 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 104.62mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 44.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.27mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    6000335BC
    Lock nuts
    • Closure cap
    6000041LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 77.27-CCTPADF
    Positioner inserts female contacts 10A
    08-2606-000-001
    Adapter for a cable-cable connection to mate a panel mount connector
    • Cable outlet 4-6 mm, 6-8 mm, sealings enclosed
    6000086MH*
    Grommets and reductions
    • hole Ø 3,0 mm
    Cable diameter range: 4,0 - 5,5 mm
    CRAD
    Straight cable clamping plate
    size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 77.62-CCW M25
    Punching nut for M25 hole
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    THCH 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 77.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • PK-RF-1
    Polarizing key
  • Accessories RF CONNECTOR
    • Pitch/style: 2.54 mm
    PCB Mount Style: Through-hole Technology (THT)
    08-2559-000-000
    Protection cap for male panel mount connector
    6000302CC
    panel mounting clip
    size 44.27-CLC4
    Polish paper grain size 4000
    size 104.27mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 44.27-CCW CT
    Hydraulic punching tool
    6000106MA
    Grommets and reductions
    • 3 holes Ø 2,8 mm
    Cable diameter range: 2,0 -3,0 mm
    08-2615-000-000
    Protection cap for male panel mount connector
    Protection degree: IP67
    size 66.40-CCVPP
    Pneumatic foot valve
    size 77.27-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    08-2831-000-000
    Protection cap for female panel mount connector
    Connector diameter: 11.5 mm
    6000219CC*
    Lock nuts
    • 14,0(h=21,0), CH 24,0 mm
    CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 104.27mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    08-2989-000-000
    Protection cap for male panel mount connector
    • Front fastened
    • 11 mm
    Protection degree: IP67
    size 66.40-CR 20
    Single code pins for 6 codings
    6000087LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    600037000
    Grommets and reductions
    • hole Ø 5,3 mm
    Cable diameter range: 5,0 - 6,5 mm
    size 44.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 104.27-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    08-2989-000-000
    Protection cap for male panel mount connector
    • Front fastened
    • 11 mm
    Protection degree: IP67
    size 66.16-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 77.27mixo-CCVPP
    Pneumatic foot valve
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    604003900
    Lock nuts, Spiral top Ø 12.5mm
    • 24,0 mm
    size 44.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 104.27mixo-CR 24 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 104.27 and Mixo frames for 6 inserts
    • 08-2769-000-000
    Protection cap for female connector
    • IP67
    Protection degree: IP67
    size 66.16-CR 20
    Single code pins for 6 codings
    size 77.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 104.62-CCTPACF
    Positioner inserts female contacts 16A
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    600032200
    Grommets
    • hole Ø 1,8 mm
    CPES
    Pliers for uncoupling connectors
  • For housings and hoods with 2 levers and 4 pegs
    • 08-2842-000-000
    Protection cap for male panel mount connector
    size 77.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.62-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • 604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    600012200
    modules adapter for 3 poles version
    size 44.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 104.27-CR 24 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • 08-2302-000-000
    Protection cap for female panel mount connector
    • IP67
    Protection degree: IP67
    C7 10 FL-N
    Frames for bulkhead mounting housings
    604001100*
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    6002002CC
    Lock nuts
    • round,7,5mm
    CR 09 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    CHCS 24 G
    Cover for electromagnetic compatibility with 2 levers
  • For enclosures with 4 pegs
    • 04-0186-009
    Solder eye ring
    604001100*
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    Montrer 30 50 100 par page
    Précédente
    74 75 76 77 78
    Suivant