Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
201 202 203 204 205
Suivant
M23cordsets-7.000.900.101
Plastic protective cap
  • For connectors M23
600024500*
Grommets and reductions
  • hole Ø max 11,8 mm
Cable diameter range: 9,5 - 13,0 mm
CHCN 16
Covers with pegs
  • Aluminium
    • 600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 57.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    M16-7.010.900.127
    Assembly tool
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    CZC 15 SL
    Covers with 2 pegs
  • For 1 lever enclosures
    • TCHC 16
    Covers with 4 pegs
  • Plastic, with eyelet
    • size 104.62-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CX CFM
    Lock-in tabs for modular units (6units) dividable
    M23power-7.010.9S0.783
    Brass protective cap with chain
    • For connectors with female thread
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 32.13-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 104.62mixo-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • CHC 32 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • 6000302CC
    panel mounting clip
    M23-7.010.9S0.702
    Brass protective cap with chain
    • For connectors with male thread
    600012700
    Grommet and reductions
    • slot 11,0 mm x 5,5 mm, Yellow
    CCTPACM
    Positioner inserts male contacts 16A
    size 57.27-CR 72
    Single coding and guide pin, for 72 codes
    size 77.62-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • CHIN 10
    Bulkhead mounting housings with double lever
  • Aluminium
    • Locking Mecahnism: Double locking levers
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP65
    CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    6DB00400C
    modules adapter for 6 poles version with silicon belt
    CZCW 25 LG
    Cover with lever
  • For enclosures with pegs
    • 7.010.900.200
    Conduit Adaptor
    6000091MA
    Blind grommet
    • white
    Montrer 30 50 100 par page
    Précédente
    201 202 203 204 205
    Suivant