Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
243 244 245 246 247
Suivant
6000219CC*
Lock nuts
  • 14,0(h=21,0), CH 24,0 mm
600009600
modules adapter for 5 poles version
size 44.27-CX 02 BF
Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 104.27CR..SC-CR 05...
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • WTW-IPC-2-1
    Wire termination tool
  • For part number IPC-2-1-T
    • size 104.62-CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • 6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    CR MOT
    Kit with earthing contact, comprising a special screw and wire-terminals for 6 mm² earthing conductors
    6000115KC
    Lock nuts
    • CH 19,0 mm, 7,5mm
    CRZ 06
    24 pole closure or reduction plate
  • In self-extinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    CHCR 24 G
    Cover with 2 levers
  • For hoods
    • size 104.62mixo-CCTPADF
    Positioner inserts female contacts 10A
    600018200*
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 44.27-CCVPP
    Pneumatic foot valve
    6000340GT
    Grommets and reductions
    • 2 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR 06 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHC 24 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • size 104.62mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    600012500*
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 44.27-CR CP
    Plain coding pin for CD and CDD inserts
    size 104.27mixo-CCVPP
    Pneumatic foot valve
    CCW PD 16
    Punching units for panel cut out of bulkhead mounting houdings
    600024500*
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    CGC 06 B
    Cover for bayonet locking
  • Aluminium
    • size 77.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • 604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    size 44.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 104.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 44.27-CCW M25
    Punching nut for M25 hole
    600013700
    blind grommet
    • yellow
    Montrer 30 50 100 par page
    Précédente
    243 244 245 246 247
    Suivant