Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
246 247 248 249 250
Suivant
size 77.27mixo-CCPZ RN
"go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 604003900*
    Lock nuts
    • Spiral top Ø 12,5, CH 24,0 mm
    size 104.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    6DB01430C
    closure cap with silicon belt
    size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • 08-2301-000-000
    Protection cap for male panel mount connector
    • IP67
    Protection degree: IP67
    WTC-1295-1
    Wire termination tool
  • For part number 1295
    • size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • 6000156LF*
    Blind reduction
    • Green
    size 104.62-CRAD
    Straight cable clamping plate
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 604003800
    spiral top ∅ 8.5 mm
    • CH 19,0 mm
    size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • 02-1785-000
    Mounting spanner for cable connectors
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 104.62-CLC4
    Polish paper grain size 4000
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • 02-1785-000
    Mounting spanner for cable connectors
    600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 104.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    61-0901-139
    Female contact (PU=100pcs) power
    • Only for 8 pole HEC connector
    6000041LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • Montrer 30 50 100 par page
    Précédente
    246 247 248 249 250
    Suivant