Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
124 125 126 127 128
Suivant
6000089MA
Grommets and reductions
  • 2 holes Ø 3,0 mm
Cable diameter range: 2,0 - 3,5 mm
size 66.40-CCPZP
Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    01-5059-001
    Mounting spanner
    size 44.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    7.010.900.102
    Brass protective cap
    • For connectors with male thread
    08-2991-000-000
    Protection cap for female panel mount connector
    • Front fastened
    Protection degree: IP67
    CHCW 50
    Cover with 4 pegs
  • For housings with 2 levers
    • size 77.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    6DB000800
    Double grommet
    • hole Ø 8 mm
    Cable diameter range: 7,0 - 8,5 mm
    size 44.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    08-2991-000-000
    Protection cap for female panel mount connector
    • Front fastened
    Protection degree: IP67
    size 66.16-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • 6000212CC
    Lock nuts for M25
    • 32,0 mm
    CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • 16-1125-071
    Flat sealing for fixing thread
    • PG 9/M16 x 1,5
    size 77.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 104.62-CCVPP
    Pneumatic foot valve
    6000286CA
    supporting frame with snap-in max ∅ 8.5 mm
    size 104.27-CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • 08-2973-000-000
    Protection cap for female panel mount connector
    • Front fastened
    size 77.27mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 57.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CHCR 10
    Cover with 4 pegs
  • For housings
    • size 104.27-CCPR RN
    Replacement tip for CCES removal tool
    6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0 mm (h=21,0 mm)
    size 49.16-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    6DB015700*
    additional cable retention Only for CH 24,0 mm
    CR K03
    Plain coding pin for CK/CKS 03 inserts
    size 57.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 77.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 104.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR 72
    Single coding and guide pin, for 72 codes
    600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    6000115KC*
    Lock nuts
    • round,7,5 mm,CH 19,0 mm
    size 21.21-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 57.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    size 77.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 104.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 77.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    600013700
    Blind Grommet
    • Yellow
    6000041LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7,5 mm cables
    Montrer 30 50 100 par page
    Précédente
    124 125 126 127 128
    Suivant