Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
134 135 136 137 138
Suivant
size 57.27-CCPNP RN
Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.62-CR 24 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • 7.010.900.143
    Multi-bus I, Female Thread, Sockets 17 pole Multi-bus II, Male Thread, Pins
    6000338GT
    Blind grommet
    • Green
    size 32.13-CCPNP
    "go /no go" control gauge to verify indenter closure
    CR 10 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHC 32 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • 6000040LF*
    blind reduction
    • green
    size 57.27-CRF
    Female double coding and guide pins, for 16 codes
    size 77.62-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    M23cordsets-7.000.900.101
    Plastic protective cap
    • For connectors M23
    600024500*
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27-CHC 10 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 104.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 66.16-CCW M25
    Punching nut for M25 hole
    CZC 25 SL
    Covers, with 2 pegs
  • For 1 lever enclosures
    • size 57.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 77.62-CRM
    Male double coding and guide pins, for 16 codes
    M16-7.010.900.127
    Assembly tool
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    CKM 03 T3
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 1 with pole 2
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    size 104.27 72-CRM
    Male coding and guide pin, for 72 codes
    AT LCSM
    RJ45/USB/LC Connectors for ATR C22
  • LC-Duplex adapter SM
    • size 49.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62-CLSP
    Fibre stripper for POF fibre optic
    M23power-7.010.9S0.783
    Brass protective cap with chain
    • For connectors with female thread
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    CWK 10 J2M8
    Patch cord with 2 RJ45 connectors, male inserts
  • 8 data contacts, in insulating enclosure
    • Protection degree: IP65
    size 77.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000302CC
    panel mounting clip
    size 57.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    M23-7.010.9S0.702
    Brass protective cap with chain
    • For connectors with male thread
    600012700
    Grommet and reductions
    • slot 11,0 mm x 5,5 mm, Yellow
    CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.27mixo-CR 16 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 77.27 and Mixo frames for 4 inserts
    • 6DB00400C
    modules adapter for 6 poles version with silicon belt
    size 49.16mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 57.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5mm
    • size 77.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • 7.010.900.200
    Conduit Adaptor
    6000091MA
    Blind grommet
    • white
    CK 03 CA
    Covers, with 2 pegs
  • for male inserts
    • size 77.27-CGCP 16 MB
    Dust protection cover for hoods high protection IP68
    size 104.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 600012200
    modules adapter for 3 poles version
    size 49.16mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 77.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • Montrer 30 50 100 par page
    Précédente
    134 135 136 137 138
    Suivant