Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
143 144 145 146 147
Suivant
size 104.27-CR 42 V
Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • 02-0273-000
    Screwing for tube
    WTC-1295-1
    Wire termination tool
  • For part number 1295
    • size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • 08-1124-000-001
    Square flange with seal
    size 104.62-CRAD
    Straight cable clamping plate
    6000156LF*
    Blind reduction
    • Green
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 604003800
    spiral top ∅ 8.5 mm
    • CH 19,0 mm
    size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • 16-1125-071
    Flat sealing for fixing thread
    • PG 9 / M16 x 1,5
    size 104.62-CLC4
    Polish paper grain size 4000
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • RE-PK-RF-1
    Polarizing key
  • Accessories RE CONNECTOR
    • Pitch/style: 2.54 mm
    PCB Mount Style: Through-hole Technology (THT)
    TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • 16-1125-071
    Flat sealing for fixing thread
    • PG 9 / M16 x 1,5
    size 104.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    6000041LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 77.27-CCTPACM
    Positioner inserts male contacts 16A
    08-0462-000-000
    PCB with two LEDs green/yellow
    • For cable connectors, screw termination
    600013700*
    Blind Grommet
    • Yellow
    CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 77.27-CCW M25
    Punching nut for M25 hole
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    THCW 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 77.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    08-2615-000-000
    Protection cap for male panel mount connector
    • IP67
    Protection degree: IP67
    604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 44.27-CLC1
    Polish paper grain size 1000
    size 104.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    7.000.900.903
    Crimp tool for manual crimping of machined crimp contacts 16 mm² (AWG 6)
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 49.16mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.62mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 57.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    M23power-7.010.900.102
    Brass protective cap
    • For connectors with male thread
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 49.16-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • CHCW 16 G
    Cover with 2 levers
  • For enclosures with 4 pegs
    • size 104.62-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • Montrer 30 50 100 par page
    Précédente
    143 144 145 146 147
    Suivant