Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
146 147 148 149 150
Suivant
WTC-1295-1
Wire termination tool
  • For part number 1295
    • 6000156LF*,**
    Blind reduction
    • Green
    size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 104.62-CRAD
    Straight cable clamping plate
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 08-1201-000-000
    Protection cap for panel mount connectors with inner thread
    • IP67
    Protection degree: IP67
    604003800
    spiral top ∅ 8.5 mm
    • CH 19,0 mm
    size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • 600024200*,**
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 104.62-CLC4
    Polish paper grain size 4000
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    08-1079-000-000
    Protection cap for male panel mount connector
    • IP67
    Protection degree: IP67
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • 600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 104.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 08-2605-000-001
    Protection cap for cable connectors
    • IP67
    Protection degree: IP67
    size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    6000041LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 77.27-CCTPACM
    Positioner inserts male contacts 16A
    55 24 MT
    Thumb screw tinnen with slote fitting for diecast hoods
  • Length is 24 mm
    • 600024500*, **
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    CK 03 CAS
    Covers, with 2 pegs
  • for male inserts
    • size 57.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    size 77.62mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    M23cordsets-7.010.900.103
    Brass protective cap
    • For connectors M23 with female thread
    600024500*
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • CR 37 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 104.62mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • 600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 77.62mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    M23power-7.010.900.127
    Assembly tool
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 49.16mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.62mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 57.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    M23power-7.000.900.901
    Crimp tool for manual crimping of machined crimp contacts
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 49.16-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • CHCW 16 G
    Cover with 2 levers
  • For enclosures with 4 pegs
    • size 104.62-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 77.62-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000302CC
    panel mounting clip
    M23-7.000.900.904
    Crimp tool for manual crimping of machined crimp contacts
    • For signal connectors
    Montrer 30 50 100 par page
    Précédente
    146 147 148 149 150
    Suivant