Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
148 149 150 151 152
Suivant
7.000.848.101
Plastic protective cap for TWINTUS
6000114MA
Grommets and reductions
  • 2 holes Ø 2,0 mm
Cable diameter range: 1,0 - 2,0 mm
size 32.13-CR CPQ
Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
size 77.27mixo-CIF 2.4
Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62mixo-CCTPADF
    Positioner inserts female contacts 10A
    600012200
    modules adapter for 3 poles version
    size 104.27-CLC4
    Polish paper grain size 4000
    6000336BC
    Lock nut
    • ring for panel mounting
    CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 77.62mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    604003900
    Lock nuts, Spiral top Ø 12.5 mm
    • CH 24,0 mm
    size 49.16-CCTPADM
    Positioner inserts male contacts 10A
    601000500
    screw ∅ 2,9 x 25,0 mm for box fixing
    CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 77.27mixo-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 77.62mixo-CXTP 40 F
    Turret heads for female contacts 40A
    6000347LA
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    size 49.16-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 6000219CC*
    Lock nuts
    • 14,0 mm (h= 21,0 mm), CH 24,0 mm
    CW 1 SC9
    SC duplex patch cord GL fibre E9/125 Yellow
    size 77.27-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 104.62mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • 6000340GT
    Grommets and reductions
    • 2 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    6000087LF*, **
    cable reduction suggested for silicon-rubber and ∅ ≤ 7,0 mm cables
    CGKCP FX
    Dust protection cover for housings high protection IP68
    CHCR 16 G
    Cover with 2 levers
  • For hoods
    • size 104.62mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 57.27-CW 1 J2M87
    Patch cord RJ45 with 2 RJ45 male connectors
  • with 8 data contacts
    • size 77.62-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    M23H-7.010.900.183
    Brass protective cap
    • For connectors with female thread
    6000156LF*
    Blind reduction
    • Green
    size 49.16mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    600024200*, **
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    CKR 65
    Gasket and screw kit for IP66/IP67
  • For CK,CQ 05, CKS inserts
    • CHC 16 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 104.62-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • size 77.62mixo-CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • M23signal-7.010.904.102
    Stainless steel protective cap
    • For connectors with male thread
    600024200*
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 49.16mixo-CXTP 40 M
    Turret heads for male contacts 40A
    600013600*
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    size 57.27-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.62-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CR 10 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHC 32
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • Montrer 30 50 100 par page
    Précédente
    148 149 150 151 152
    Suivant