Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
227 228 229 230 231
Suivant
size 77.62-CX 8 J6M
RJ45 male IDC connector
  • 8 data contacts
    • 6000021EF*
    Grommets and reductions
    • hole Ø 4,8 mm
    Cable diameter range: 5 mm
    604003900
    Lock nuts, Spiral top Ø 12.5mm
    • 24,0 mm
    size 32.13-CCPR RN
    Replacement tip for CCES removal tool
    M16cordsets-7.010.9S0.704
    Brass protective cap with chain
    • For connectors M16 with male thread
    size 57.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 104.62-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 57.27-CR 10 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • CHC 32 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • 6DB015700*
    additional cable retention
    600032200
    Grommets
    • hole Ø 1,8 mm
    CCTPACF
    Positioner inserts female contacts 16A
    M23signal-7.010.9S4.103
    Stainless steel protective cap
    • For connectors with female thread
    • with rope, length 100 mm
    size 57.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.62-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 57.27-CHC 10 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    6000269CC*
    Lock nuts
    • 11,0 mm, CH 24,0 mm
    CZC 25 LG
    Covers, with lever
  • For enclosures with pegs
    • 600012200
    modules adapter for 3 poles version
    CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • 7.000.900.151
    Plastic protective cap
    • For connectors with male thread
    size 57.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 77.62 72-CRM
    Male coding and guide pin, for 72 codes
    size 104.27-CR 72
    Single coding and guide pin, for 72 codes
    600024500*,**
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    size 49.16-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    6002002CC
    Lock nuts
    • round,7,5mm
    CWKA 10 J2M8
    Patch cord with 2 RJ45 connectors, male inserts
  • 8 data contacts, in metal enclosure
    • Protection degree: IP65
    7.010.900.169
    Brass protective cap
    • For connectors with female thread
    Montrer 30 50 100 par page
    Précédente
    227 228 229 230 231
    Suivant