Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
245 246 247 248 249
Suivant
M23power-7.010.900.102
Brass protective cap
  • For connectors with male thread
08-2672-000-000
Protection cap for male panel mount connector
  • IP67
Protection degree: IP67
size 44.27mixoCX7-CGD 16...
Crimp matrixes for CX7 contacts with 16 mm² section
6000269CC
Lock nuts
  • CH 24,0 mm, 11,0 mm
size 77.27-CGCP 16 FX
Dust protection cover for housings high protection IP68
size 32.13-CCPR RN
Replacement tip for CCES removal tool
CHC 50 S
Covers with 4 pegs
  • For enclosures with 2 levers
    • 604003900*
    Lock nuts
    • spiral top ∅ 12,5 mm, CH 24,0 mm
    7.010.9S0.703
    Brass protective cap with chain
    • For connectors with female thread
    02-0007-000
    Distance shell for panel mount connectors
    • Dip solder version, 2-19 contacts
    KT KB
    Cable bushing for series 17,47
    Cable diameter range: 2-9 mm
    size 44.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    size 77.27-COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • CCTPACF
    Positioner inserts female contacts 16A
    size 66.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • 6002002CC*
    Lock nuts
    • round,7,5 mm
    size 57.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.27-CCW M25
    Punching nut for M25 hole
    CZC 25 LG
    Covers, with lever
  • For enclosures with pegs
    • 7.010.900.135
    Adaptor flange for Straight Connectors
    02-0007-000
    Distance shell for panel mount connectors
    • Dip solder version, 2-19 contacts
    6000338GT
    Blind grommet
    • Green
    THCH 16 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • 6000040LF*, **
    blind reduction
    • green
    61-0896-139
    Female contact (PU=100pcs) signal
    • Only for 8 pole HEC connector
    size 57.27mixo-CR 10 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 57.27mixo and mixo frames for 3 inserts
    • size 32.13-CCW CT
    Hydraulic punching tool
    size 49.16-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    Montrer 30 50 100 par page
    Précédente
    245 246 247 248 249
    Suivant