Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
250 251 252 253 254
Suivant
CCTP 10
Turret heads for 10 A contacts (CDF & CDM series)
CR 06 BPE
PE-jumpers
  • Galvanised brass
    • CHIN 10
    Bulkhead mounting housings with double lever
  • Aluminium
    • Locking Mecahnism: Double locking levers
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • CR..SSsize 104.27-CR 05...
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 104.62-CLC4
    Polish paper grain size 4000
    WTC-1300-1
    Wire termination tool
  • For part number 1300-T
    • 08-0462-000-000
    PCB with two LEDs green/yellow
    • For cable connectors, screw termination
    604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    604000100
    fischer ∅ 4,0 x 20,0 mm
    6000090MA
    Grommets and reductions
    • 1 hole Ø 2,0 mm
    Cable diameter range: 1,0 - 3,0 mm
    CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CHCW 06 L
    Cover with pegs
  • For 1 lever enclosures
    • CHCN 10
    Covers with pegs
  • Aluminium
    • CR 16 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 77.62-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 104.62-CLDL
    Polishing disc for POF and MOST contacts
    WTC-1286-1
    Wire termination tool
  • For part number 1286
    • 02-0273-000
    Screwing for tube
    604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    604000100
    fischer ∅ 4,0 x 20,0 mm
    6000114MA
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 21.21-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    CHCW 06 LG
    Cover with lever
  • For enclosures with pegs
    • CHCN 10 G
    Covers with 2 levers
  • Aluminium
    • size 77.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • CR 24 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 104.27 and Mixo frames for 6 inserts
    • size 104.62-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    WTC-1295-1
    Wire termination tool
  • For part number 1295
    • 07-0086-000
    Hexagon torque spanner
    • SW 13, 0,6 Nm, for 763 series
    Montrer 30 50 100 par page
    Précédente
    250 251 252 253 254
    Suivant