Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
257 258 259 260 261
Suivant
CYG 06H1010
2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 57.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.62-CRF
    Female double coding and guide pins, for 16 codes
    04-0734-124
    Shielding sheet for panel mount connectors
    • Fastened from back side
    • PG 9
    600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    6000365GT
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 32.13-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CR 06 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CR..SSsize 57.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 77.27mixo-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • 600012600
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    6DB02180C
    Closure cap for THx.387.Dxx
    600012600
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 32.13-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CR 06 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.27mixo-CR 16 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 104.62 72-CRM
    Male coding and guide pin, for 72 codes
    16-1125-071
    Flat sealing for fixing thread
    • PG 9 / M16 x 1,5
    600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    600012600
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 32.13-CCPNP
    "go /no go" control gauge to verify indenter closure
    CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • 02-0273-000
    Screwing for tube
    600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    6DB023500
    Closure cap for THx.387.Cxx
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 32.13-CCPR RN
    Replacement tip for CCES removal tool
    CHCP 10
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • Montrer 30 50 100 par page
    Précédente
    257 258 259 260 261
    Suivant