Connectors

Products

Show 30 50 100 per page
Previous
1 2 3 4
Next
size 77.62-CX 08 CM
Modular units 8P, crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 16 A
    Nominal rated voltage: 400 V
    CAC 32 L
    Hoods without entry, to be pierced
  • With 2 pegs for levers
    • Locking Mecahnism: Double locking levers
    Material housing: Aluminium
    size 77.62mixo-CR 72 CX
    Single coding and guide pin, for 72 codes
    CFO 32 X
    Hoods with 2 levers
  • Side entry, without adaptor
    • Locking Mecahnism: Double locking levers
    Position cable feed: Side entry
    Material housing: Aluminium
    Protection degree: IP66
    size 77.62-CDFJD 0.3
    10 A female crimp contacts
  • Basic gold plated
    • Type of connection: Crimp connection
    CFV 32 G29
    Hoods with 2 levers and gasket
  • Top entry, without adaptor
    • Locking Mecahnism: Double locking levers
    Position cable feed: Top entry
    Material housing: Aluminium
    Protection degree: IP66
    size 77.62mixo-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 77.62-CPM 06
    Inserts, 12P + PE, Screw terminal connections
  • Male inserts with male contacts
    • Type of connection: Screw connection
    Rated current: 35 A
    Nominal rated voltage: 690 V
    CHP 32.29
    Surface mounting housings
  • With 2 levers
    • Locking Mecahnism: Double locking levers
    Position cable feed: Side entry
    Material housing: Aluminium
    Protection degree: IP66
    size 77.62-CCEM 16
    Inserts, 32P + PE, crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 16 A
    Nominal rated voltage: 500 V
    size 77.62mixo-CCMJD 0.3
    16 A male crimp contacts
  • Basic gold plated
    • Type of connection: Crimp connection
    size 77.62-CX 01 BCM
    Shielded BUS coaxial connectors, 1 pole + shield, 16 A
  • Male insert, one contact seat + shield
    • Type of connection: Crimp connection
    Rated current: 16 A
    Nominal rated voltage: 50 V
    size 77.62-CYFA 16
    200A female crimp contacts
  • Silver plated
    • Type of connection: Crimp connection
    Rated current: 200 A
    size 77.62-CX 01 YM
    Modular units 1P, crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 200 A
    Nominal rated voltage: 1000 V
    size 77.62 mixo-CC 0.5 AN
    16 A male crimp contacts for advanced opening
  • Silver plated
    • Type of connection: Crimp connection
    Rated current: 16 A
    size 77.62mixo-C7ES
    Removal tool for 70A CX7 series contact
    size 77.62-CX 25 IM
    Modular units 25P, crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 4 A
    Nominal rated voltage: 50 V
    size 77.62-CX 3/4 XDM
    Modular units 3+4P, crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 3P: 40 A 4P: 10 A
    Nominal rated voltage: 830 V
    MHPW 32.50
    Surface mounting housings
  • With lever
    • Locking Mecahnism: Double locking levers
    Position cable feed: Side entry
    Material housing: Aluminium
    Protection degree: IP66
    CFV 32 L
    Hoods with 2 pegs
  • Top entry, without adaptor
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Aluminium
    Protection degree: IP66
    size 77.62-CCMD 0.3
    16 A male crimp contacts for normal opening
  • Gold plated
    • Type of connection: Crimp connection
    Rated current: 16 A
    CFO 32.29
    Hoods with 4 pegs
  • Side entry, without adaptor
    • Locking Mecahnism: Double locking levers
    Position cable feed: Side entry
    Material housing: Aluminium
    Protection degree: IP66
    size 77.62-CMCEM 06
    Inserts, 12+4(aux)P + PE, crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 16 A
    Nominal rated voltage: 830 V
    size 77.62-CSHM 16
    Inserts, 32P + PE, Spring terminal connection
  • Male inserts with male contacts
    • Type of connection: Spring clamp connection
    Rated current: 16 A
    Nominal rated voltage: 500 V
    size 77.62-CX7MA 10
    70 A male contacts
  • Silver plated
    • Type of connection: Crimp connection
    Rated current: 70 A
    size 77.62mixo-CCMF 0.3
    Iron 16A male crimp contacts
    Type of connection: Crimp connection
    size 77.62-CX 02 HM
    High voltage modular units 2P, crimp connections
  • Male inserts high voltage for male contacts
    • Type of connection: Crimp connection
    Rated current: 16 A
    Nominal rated voltage: 2900/5000 V
    size 77.62-CX PLM
    Male contacts POF*1.5 mm
    Type of connection: Crimp connection
    size 77.62-CX 04 LF
    Modular units for POF and MOST contacts, crimp connections
  • Female inserts for female contacts
    • Type of connection: Crimp connection
    size 77.62mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 77.62mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 77.62mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 77.62-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 77.62-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • CHC 32 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 77.62-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 77.62-CRF
    Female double coding and guide pins, for 16 codes
    size 77.62-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    size 77.62mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.62mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 77.62mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.62mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.62-CCW M25
    Punching nut for M25 hole
    size 77.62-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.62-CCTPADF
    Positioner inserts female contacts 10A
    size 77.62-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62-CRIC M3
    Panel fitted insert fastening screws
    size 77.62mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 77.62mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 77.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • CHC 32 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • size 77.62-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.62 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.62mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.62mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 77.62mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 77.62mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.62-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 77.62-CCTPADM
    Positioner inserts male contacts 10A
    size 77.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 77.62-CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • size 77.62-CLC1
    Polish paper grain size 1000
    size 77.62mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 77.62-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    CHC 32 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 77.62-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.62 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.62mixo-CCVPP
    Pneumatic foot valve
    size 77.62mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 77.62mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.62-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CR 16 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • size 77.62-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.62-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.62-CCPR RN
    Replacement tip for CCES removal tool
    size 77.62-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 77.62-CLC4
    Polish paper grain size 4000
    size 77.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.62mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 77.62mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    CHC 32 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • size 77.62-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.62-CR 72
    Single coding and guide pin, for 72 codes
    size 77.62-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 77.62mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 77.62mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 77.62-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 77.62-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 77.62-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.62-CRAD
    Straight cable clamping plate
    size 77.62-CLDL
    Polishing disc for POF and MOST contacts
    Show 30 50 100 per page
    Previous
    1 2 3 4
    Next