Connectors

Products

Show 30 50 100 per page
Previous
64 65 66 67 68
Next
7.015.900.102
Brass protective cap
  • For connectors with male thread
6000219CC
Lock nuts
  • CH 24,0 mm, 14,0mm (h=21,0mm)
CHCN 24
Covers with pegs
  • Aluminium
    • 16-1125-071
    Flat sealing for fixing thread
    • PG 9 / M16 x 1,5
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 104.62-CLC1
    Polish paper grain size 1000
    size 44.27-CCTPADF
    Positioner inserts female contacts 10A
    7.010.9S0.707
    Brass protective cap with chain
    • For connectors with female thread
    6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • C7 24 FL-N
    Frames for bulkhead mounting housings
    16-1125-071
    Flat sealing for fixing thread
    • PG 9 / M16 x 1,5
    600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 44.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • M23RJ45-7.010.900.204
    Adaptor for Conduit Fittings
    size 104.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    6000042LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 6.0 mm cables
    CR 06 LN
    Spare part lever for enclosures with levers
    size 77.27-CCTPACF
    Positioner inserts female contacts 16A
    08-0462-000-000
    PCB with two LEDs green/yellow
    • For cable connectors, screw termination
    600013700*
    Blind Grommet
    • Yellow
    CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • 7.000.980.161
    Plastic protective cap
    • For connectors with male/female thread
    size 104.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 66.40-CCW M25
    Punching nut for M25 hole
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    TCHC 06 LG
    Covers with thermoplastic lever and gasket
  • With loop
    • size 77.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • 08-2615-000-000
    Protection cap for male panel mount connector
    • IP67
    Protection degree: IP67
    604001100*
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    size 44.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 104.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    CCW CT
    Hydraulic punching tool
    6000089MA
    Grommets and reductions
    • 2 holes Ø 3,0 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 66.40-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    604001100*
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    08-0425-000-000
    Protection cap for male cable connector
    6000338GT
    Blind Grommet
    • Green
    size 44.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    CHCW 50
    Cover with 4 pegs
  • For housings with 2 levers
    • size 77.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    6000090MA*
    Grommets and reductions
    • 1 hole Ø 2,0 mm
    Cable diameter range: 1,0 - 3,0 mm
    08-1205-000-000
    Mounting spanner
    6000340GT
    Grommets and reductions
    • 2 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    6DB000800
    Double grommet
    • hole Ø 8 mm
    Cable diameter range: 7,0 - 8,5 mm
    size 44.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 66.16-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • 6000085MM*
    Grommets and reductions
    • hole Ø 5,2 mm
    Cable diameter range: 5,5 - 7,0 mm
    08-2668-000-001
    Blind plug
    • IP67
    Protection degree: IP67
    7.010.900.144
    Multi-bus I, Female Thread, Pins 17 pole Multi-bus II, Male Thread, Sockets
    6000212CC
    Lock nuts for M25
    • 32,0 mm
    CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    6040052CC*
    Lock nuts
    • Spiral tip Ø 18,0, CH 29,0 mm
    size 104.62-CCVPP
    Pneumatic foot valve
    M16cordsets-7.010.900.163
    Brass protective cap
    • For connectors M16 with female thread
    6000286CA
    supporting frame with snap-in max ∅ 8.5 mm
    size 104.27-CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • 6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 57.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CHCR 10
    Cover with 4 pegs
  • For housings
    • size 104.27-CCPR RN
    Replacement tip for CCES removal tool
    6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0 mm (h=21,0 mm)
    size 49.16-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 6DB015700*
    additional cable retention Only for CH 24,0 mm
    CR K03
    Plain coding pin for CK/CKS 03 inserts
    size 57.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 77.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 104.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR 72
    Single coding and guide pin, for 72 codes
    6000115KC*
    Lock nuts
    • round,7,5 mm,CH 19,0 mm
    size 21.21-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 57.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    size 77.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 104.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 77.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000041LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7,5 mm cables
    CKA 03 CS
    Covers, with 2 pegs
  • For female inserts
    • size 57.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.62mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    size 49.16mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 77.27mixo-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • 600018200*
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 57.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 600022400
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 49.16mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 77.27-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.62mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • 600013700*
    blind grommet
    • yellow
    size 57.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • Show 30 50 100 per page
    Previous
    64 65 66 67 68
    Next