Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
37 38 39 40 41
Volgende
C7 10 FL-N
Frames for bulkhead mounting housings
CX 4/2 JM
RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR 09 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 104.27mixo-CX CFM
    Lock-in tabs for modular units (6units) dividable
    CLC1
    Polish paper grain size 1000
    KK 33 B
    Cable bushings
  • 9 and 15 pole for series 17,47 and 57
    • Cable diameter range: 3,3-5,3 mm
    size 77.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 44.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • CKAG 03 C
    Cover with pegs and gasket
    CYG 06H1010
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • CIVTP D
    Turret head for 5A D-SUB contacts
    55 35 44T
    Thumb screw tinned with slot and internal thread in the head, fitting for plastic hoods
  • Length is 35 mm
    • size 44.27 72-CRF
    Female coding and guide pin, for 72 codes
    CZCR 06 LG
    Cover with lever
  • For hoods
    • CG 24 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 49.16mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 44.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    CHC 06 L
    Covers with pegs
  • For enclosures with lever
    • CHC 24 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 44.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.62-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 66.40-CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • size 77.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 32.13-CCTPADF
    Positioner inserts female contacts 10A
    size 44.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 104.62-CR 20
    Single code pins for 6 codings
    size 104.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 66.16-CCTPADF
    Positioner inserts female contacts 10A
    size 77.27-CCPR RN
    Replacement tip for CCES removal tool
    size 32.13-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 44.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 104.62-CLDL
    Polishing disc for POF and MOST contacts
    size 104.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 66.16-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.27-CRAS
    Angled cable clamping plate
    CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 104.62mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    CZCW 25 LG
    Cover with lever
  • For enclosures with pegs
    • size 49.16-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.27-CLSP
    Fibre stripper for POF fibre optic
    CR Q12
    Plain coding pin for CQ 12 inserts
    size 44.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 104.27-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 49.16-CCPNP
    "go /no go" control gauge to verify indenter closure
    CW 1 SC50
    SC duplex patch cord GL fibre G50/125 Orange
    size 77.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 44.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    CGKCP MB
    Dust protection cover for hoods high protection IP68
    CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 49.16mixo-CCVPP
    Pneumatic foot valve
    size 77.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 44.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    CKR 65 D
    Gasket and screw kit for IP66/IP67
  • For CD 07/08 inserts
    • COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 104.27-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CLDL
    Polishing disc for POF and MOST contacts
    size 104.62-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 77.62CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 57.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 104.62-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CCW PD 03G
    Punching units for panel cut out of bulkhead mounting houdings
  • For CKG IP68 enclosures
    • size 104.27-CCTPADF
    Positioner inserts female contacts 10A
    size 77.27-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.62-CCPR RN
    Replacement tip for CCES removal tool
    size 77.27-CCW CT
    Hydraulic punching tool
    size 104.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 57.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 104.27-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 57.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 77.62-CLC4
    Polish paper grain size 4000
    size 104.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    CGC 16 B
    Covers for bayonet locking
  • Aluminium
    • size 57.27-CHES
    Contact holder removal tool
    size 77.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    CHC 16 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • CR 25 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
  • 25 poles
    • Protection degree: IP65
    size 77.62mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 57.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 57.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 77.62mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 57.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 57.27-CHC 10 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • size 104.62-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    TCHC 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic,with loop
    • size 77.62-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 57.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 104.62mixo-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHC 32 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • size 57.27mixo-CGPZ LOC
    Locator for CG contacts
    size 77.62-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 66.16-CCW M25
    Punching nut for M25 hole
    CGPZ LOC
    Locator for CG contacts
    size 77.27-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • Toon 30 50 100 per pagina
    Vorige
    37 38 39 40 41
    Volgende