Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
61 62 63 64 65
Volgende
6000302CC
panel mounting clip
08-2811-000-000
Protection cap for female panel mount connector
6000156LF*
blind reduction
  • Green
size 104.27mixo-CR 24 AT
Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.62-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 604003900*
    Lock nuts
    • Spiral top Ø 12,5, CH 24,0 mm
    08-2769-000-000
    Protection cap for female connector
    Protection degree: IP67
    6DB01430C
    closure cap with silicon belt
    size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    08-2813-000-000
    Protection cap for male cable connector
    Connector diameter: 9.85 mm
    size 104.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.62 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • 6000156LF*
    Blind reduction
    • Green
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 08-2424-010-000
    Protection cap for male cable connector
    Protection degree: IP67
    604003800
    spiral top ∅ 8.5 mm
    • CH 19,0 mm
    size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • size 104.62-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    08-2424-010-000
    Protection cap for male cable connector
    Protection degree: IP67
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • size 104.62mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • 600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 08-2616-000-000
    Protection cap for female panel mount connector
    • IP67
    Protection degree: IP67
    size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    6000041LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 77.27-CCTPACM
    Positioner inserts male contacts 16A
    size 104.62mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    600013700*
    Blind Grommet
    • Yellow
    CCW PD 03
    Punching units for panel cut out of bulkhead mounting houdings
  • For CK/CKA enclosures
    • CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • 08-2610-000-000
    Protection cap for female connectors
    size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    600030600
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    THCW 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 77.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 66.40-CCW CT
    Hydraulic punching tool
    size 44.27-CLC1
    Polish paper grain size 1000
    08-2301-000-000
    Protection cap for male panel mount connector
    • IP67
    Protection degree: IP67
    size 104.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    6000106MA
    Grommets and reductions
    • 3 holes Ø 2,8 mm
    Cable diameter range: 2,0 -3,0 mm
    size 66.40-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    604004900*
    Grommets and reductions
    • hole Ø max 14,0 mm
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CX7PZ LOC
    Locator for CX7 contacts
    02-1785-000
    Mounting spanner for cable connectors
    CHCW 50 G
    Covers with 2 levers
  • For enclosures with 4 pegs
    • size 77.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    6000090MA*
    Grommets and reductions
    • 1 hole Ø 2,0 mm
    Cable diameter range: 1,0 - 3,0 mm
    6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    600037000
    Grommets and reductions
    • hole Ø 5,3 mm
    Cable diameter range: 5,0 - 6,5 mm
    size 44.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • 02-1785-000
    Mounting spanner for cable connectors
    size 104.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 66.16-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.27mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    6000084MG*
    Grommets and reductions
    • hole Ø 7,0 mm
    Cable diameter range: 7,0 - 9,0 mm
    61-0901-139
    Female contact (PU=100pcs) power
    • Only for 8 pole HEC connector
    604003800
    Lock nuts, Spiral top Ø 8.5mm
    • 19,0 mm
    size 44.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    08-2681-000-000
    Protection cap for female panel mount connector
    • M12
    size 104.62-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.27mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    6DB015700
    additional cable retention
    07-0079-000
    Hexagon torque spanner
    • SW 18, 0,6 Nm, for 713 series
    600032100
    Grommets with closure cap
    • hole Ø 1,8 mm
    08-0349-000-001
    Protection cap for male cable connector
    • IP67
    Protection degree: IP67
    CPT 24
    Temporary protection cover for transportation
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • size 104.62-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.27mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    6000269CC*
    Lock nuts
    • 11,0 mm, CH 24,0 mm
    08-2769-000-000
    Protection cap for female connector
    Protection degree: IP67
    600012200
    modules adapter for 3 poles version
    WTW-1293
    Wire termination tool
  • For part number 1293
    • size 104.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 104.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 77.27mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    600024500*,**
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    size 57.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27 72-CRM
    Male coding and guide pin, for 72 codes
    6000347LA
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    size 49.16-CR CP
    Plain coding pin for CD and CDD inserts
    size 77.62-CLSP
    Fibre stripper for POF fibre optic
    6000269CC*
    Lock nuts
    • 11,0 mm, CH 24,0 mm
    CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 57.27mixo-CYPZ LOC
    Locator for CY contacts
    6000340GT
    Grommets and reductions
    • 2 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 77.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000041LF*, **
    cable reduction suggested for silicon-rubber and ∅ ≤ 7,5 mm cables
    Toon 30 50 100 per pagina
    Vorige
    61 62 63 64 65
    Volgende