Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
64 65 66 67 68
Volgende
size 104.27-CRBM
Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • 6000342GT
    Grommets and reductions
    • 3 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CRM
    Male double coding and guide pins, for 16 codes
    size 77.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • 6002002CC*
    Lock nuts
    • round,7,5 mm
    CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 77.62mixo-CCTPACM
    Positioner inserts male contacts 16A
    7.010.900.145
    Control Cabinet adapter for Multibus II - AIDA
    • Rear Mounting
    • Central Locking
    6000338GT
    Blind grommet
    • Green
    CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 77.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    KT KB
    Cable bushing for series 17,47
    Cable diameter range: 2-9 mm
    6000040LF*, **
    blind reduction
    • green
    CKG 03 CN
    Black cover with pegs and gasket
    size 57.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.62mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • M23cordsets-7.010.900.103
    Brass protective cap
    • For connectors M23 with female thread
    6000040LF*,**
    Blind reduction
    • green
    CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 77.27-CX CFM
    Lock-in tabs for modular units (6units) dividable
    600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 57.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.62mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • M23power-7.010.900.127
    Assembly tool
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 49.16mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 104.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • M23power-7.000.900.901
    Crimp tool for manual crimping of machined crimp contacts
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 49.16-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    CHCR 16
    Cover with 4 pegs
  • For housings
    • size 104.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 77.62-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    M23-7.000.900.904
    Crimp tool for manual crimping of machined crimp contacts
    • For signal connectors
    600012700
    Grommet and reductions
    • slot 11,0 mm x 5,5 mm, Yellow
    size 32.13-CCTPACM
    Positioner inserts male contacts 16A
    CHC 16 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • size 104.62-CR GND
    Metal adaptor
    size 57.27-CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 77.62mixo-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 6000049CC
    closure cap for TH405-406-409
    7.000.848.101
    Plastic protective cap for TWINTUS
    6000114MA
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 32.13-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 104.62-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CYG 06H1010
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    600012200
    modules adapter for 3 poles version
    6000336BC
    Lock nut
    • ring for panel mounting
    CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 57.27-CR 20
    Single code pins for 6 codings
    size 77.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    6000041LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    size 44.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CRZ 24
    24 pole closure or reduction plate
  • In self-extinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    size 77.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • 6000219CC*
    Lock nuts
    • 14,0(h=21,0), CH 24,0 mm
    size 104.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 08-1202-000-000
    Protection cap for coupling connectors
    • IP67
    Protection degree: IP67
    6DB00750C
    modules adapter for 6 poles version
    size 44.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 104.27-CR 24 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • WTC-1307-1
    Wire termination tool
  • For part number 1307
    • 6000087LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    size 104.62-CRIC M3
    Panel fitted insert fastening screws
    08-2670-000-000
    Protection cap for male panel mount connector
    • IP67
    Protection degree: IP67
    TCHC 10
    Covers with 4 pegs
  • Plastic,with eyelet
    • 6000269CC
    Lock nuts
    • CH 24,0 mm, 11,0mm
    CX CFM
    Lock-in tabs for modular units (6units) dividable
    CGC 24
    Covers for screw locking
  • Aluminium
    • 600022400
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 104.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    08-2604-000-001
    Protection cap for panel mount connectors
    • IP67
    Protection degree: IP67
    size 44.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CHC 24 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • 08-2811-000-000
    Protection cap for female panel mount connector
    600012500*
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 104.62mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 44.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CCW PD 24
    Punching units for panel cut out of bulkhead mounting houdings
    6000040LF*,**
    blind reduction
    • Green
    CG 06 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 77.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    08-2769-000-000
    Protection cap for female connector
    Protection degree: IP67
    604004400*
    Grommets and reductions
    • slot 16,3 mm x 6,0 mm
    08-2813-000-000
    Protection cap for male cable connector
    Connector diameter: 9.85 mm
    CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • size 104.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 49.16-CCW M25
    Punching nut for M25 hole
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    C7 06 FL-N
    Frames for bulkhead mounting housings
    size 77.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 08-2424-010-000
    Protection cap for male cable connector
    Protection degree: IP67
    Toon 30 50 100 per pagina
    Vorige
    64 65 66 67 68
    Volgende