A&C Solutions - Producten: Connectoren

Torque wrench

Crimping tool for 10 A and 16 A contacts

Daniels AF8 model

Lock nuts

14,0 mm (h= 21,0 mm), CH 24,0 mm

Protection cap for male cable connector

Support for CCPZP pneumatic crimping tool

Extraction tool for Mixo Bus connector

For the extraction of he BUS shielded connectors from the MIXO BUS insert

Grommets and reductions

2 holes Ø 5,4 mm

Cable diameter range: 4,0 - 5,0 mm

Protection cap for male cable connector

Protection degree: IP67

Interface for printed circuit with 6 female contacts (silver)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

blind reduction

green

RJ45 male connector with 8 data contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

Protection cap for female cable connector

Connector diameter: 11.5 mm

Crimp matrixes for CG contacts with 16 mm² section

Brass protective cap

For connectors with male thread

Blind reduction

Green

Protection cap for male panel mount connector

Protection degree: IP67

Cable bushings

9 and 15 pole for series 17,47 and 57

Cable diameter range: 3,3-5,3 mm

Metal adaptor

Grommets and reductions

hole Ø max 8,5 mm

Cable diameter range: 7,0 - 9,0 mm

Turret heads for 10 A contacts (CDF & CDM series)

Stainless steel protective cap

For connectors with male thread
with rope, length 100 mm

RJ45 male IDC connector

8 data contacts

Grommets and reductions

hole Ø max 8,5 mm

Cable diameter range: 7,0 - 9,0 mm

Protection cap for male panel mount connector

Protection degree: IP67

Thumb screw tinned with slot and internal thread in the head, fitting for plastic hoods

Length is 35 mm

Ground terminals for shielded cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

Grommets and reductions

2 holes Ø 3,3 mm

Cable diameter range: 2,0 - 4,0 mm

Dust protection cover

For housings and hoods with 1 or 2 levers, with 2 or 4 pegs

6A male contacts for male inserts with terminal Ø 1mm

Type of connection: Crimp connection

Rated current: 6 A

Adaptor flange for Straight Connectors

Positioner inserts male contacts 16A

Grommets and reductions

3 holes Ø 3,3 mm

Cable diameter range: 2,0 - 4,0 mm

Protection cap for female panel mount connector

IP67, front fastened

Protection degree: IP67

Pneumatic foot valve

Kit with 2 elements, for coupling of inserts with screw fixing centre distance

RJ45 female connector with 8 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

Assembly tool

Bridge for star connection

With 3 female 10 A contacts, silver plated

Grommets and reductions

1 hole Ø 3,2 mm

Cable diameter range: 1,5 - 4,5 mm

Protection cap for male cable connector

Insertion tool for insertion of the contacts into the inserts

For crimped contacts up to 0.75 mm²

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

additional cable retention Only for 24.0 mm

Plastic protective cap

For connectors with male/female thread

Screws for second earth terminal

For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts

Grommets and reductions

hole Ø max 14,0 mm

Protection cap for female panel mount connector

IP67

Protection degree: IP67

Angled cable clamping plate

Positioner inserts female contacts 16A

modules adapter for 6 poles version

Short screws for grip panels of cables outside enlcosures

In zinc iron, N° 2 pieces

Brass protective cap with chain

For connectors with male thread

Positioner inserts male contacts 10A

Closure cap for THx.387.Axx/THx.387.Exx/THx.387.Lxx

Rectangular flange for panel mount connectors

Polishing disc for POF and MOST contacts

Bridge for delta connection

With 2 female 10 A contacts, silver plated and open type crimp barrel

sealing cap with silicon belt for TH385

Spare part lever for enclosures with levers

Crimp matrixes for CX7 contacts with 16 mm² section

Grommets and reductions

2 holes Ø 5,4 mm

Cable diameter range: 4,0 - 5,0 mm

Rectangular flange for panel mount connectors

cover for male mini F connector

Rated current:
Number of contacts of range: 2 - 9

Connector diameter:
Protection degree:

Coupling screws

Bush for CT,CTS,CTSE inserts

Lock nuts

CH 24,0 mm, 14,0 mm (h=21,0 mm)

Dummy Plug

PG9/M16 x 1,5

Turret heads for male contacts 40A

additional cable retention Only for CH 24,0 mm

Mounting spanner for panel mount connectors

Crimping tool for POF CX PL and MOST CX ML contacts

RENNSTEIG model

Turret heads for 10 A contacts (CDF & CDM series)

Grommets and reductions

4 holes Ø 3,4 mm

Cable diameter range: 2,5 - 3,0 mm

Protection cap for female cable connector

Protection degree: IP67

Lock nuts

round,7,5 mm,CH 19,0 mm

Patch cord with 2 RJ 45 male connector s

with 4 data contacts, Class 5e

Protection cap for female cable connector

IP67

Protection degree: IP67

Crimp matrixes for CY contacts section 16mm²

Manual Crimp tool for EMC sleeves M23 fast Ethernet PoE

6A male contacts for male inserts with terminal Ø 1mm

Type of connection: Crimp connection

Rated current: 6 A

Grommets and reductions

1 hole Ø 6,0 mm

Cable diameter range: 5,5 - 7,0 mm

Ring nut for fixing thread

PG 9
14 mm

RJ45 male connector with 4 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

cable reduction suggested for silicon-rubber and ∅ ≤ 6,0 mm cables

Seat for two shielded connectors

Female inserts, two seats for BUS connectors

Rated current: 10 A

Nominal rated voltage: 50 V

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

Brass protective cap

For connectors M23 with male thread

RJ45 female connector with 8 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables

Ring nut for fixing thread

PG 9
14 mm

Grommets and reductions

4 holes Ø 3,3 mm

Cable diameter range: 2,0 - 3,5 mm

Lock-in tabs for modular units (6units) dividable

Extraction tool for Mixo Bus connector

For the extraction of he BUS shielded connectors from the MIXO BUS insert

Stainless steel protective cap

For connectors with female thread

Ground terminals for shielded cables and for several earth connections clams

In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures

Grommets and reductions

5 holes Ø 3 mm

Cable diameter range: 1,5 - 3,5 mm

Sealing for square flange

Metal version

Covers with 2 pegs

For enclosures with 1 lever with gasket

Grommets and reductions

slot 11,0 mm x 5,5 mm

U-bolt for cable screening

To be fitted on CR..SC anchors

Adpater for Conduit Fittings