A&C Solutions - Producten: Connectoren

Frames for bulkhead mounting housings

Mounting spanner

Lock nuts

round,7,5mm

Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures

Protection degree: IP65

Cover for electromagnetic compatibility with 2 levers

For enclosures with 4 pegs

Grommets and reductions

4 holes Ø 3,3 mm

Cable diameter range: 2,0 - 3,5 mm

Protection cap for female cable connector

Protection degree: IP67

Positioner inserts female contacts 16A

Pneumatic crimping tool for 10A and 16A contacts

Daniels WA27F (turret excluded)

Grommets and reductions

1 hole Ø 6,0 mm

Cable diameter range: 5,5 - 7,0 mm

2 branch-off T-Box coupling

For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing

Locking Mecahnism: Single locking lever

Material housing: Aluminium

Protection degree: IP65

Covers with 2 pegs

For enclosures with 1 lever with gasket

Grommets and reductions

2 holes Ø 3,3 mm

Cable diameter range: 2,0 - 4,0 mm

Hexagon torque spanner

for 713 series

Locator for CG contacts

Female coding and guide pin, for 72 codes

Pneumatic crimping tool for 10A and 16A contacts

Daniels WA27F (turret excluded)

Punching units for panel cut out of bulkhead mounting houdings

Grommets and reductions

hole Ø max 8,5 mm

Cable diameter range: 7,0 - 9,0 mm

Cover with lever

For hoods

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

Grommets and reductions

slot 11,0 mm x 5,5 mm

Hexagon torque spanner

SW 18, 0,6 Nm, for 713 series

Cable stripper, cuts the cable steath and releases the wires in a single operation

Turret head for 5A D-SUB contacts

Hydraulic punching tool

Grommets and reductions

slot 11,0 mm x 5,5 mm

Covers with pegs

For enclosures with lever

Bridge for delta connection

With 2 female 10 A contacts, silver plated and open type crimp barrel

Grommets and reductions

slot 11,0 mm x 5,5 mm

Protection cap for female cable connector

IP67

Protection degree: IP67

Crimping tool with automatic positioner

Daniels WA27FAP (inserts excluded)

Removal tools for the extraction of contacts from the insert

For 16 A contacts

RJ45/USB/LC Connectors for ATR C22

RJ45 Jack A CAT 6A

blind grommet

white

Screws for second earth terminal

For CDA/CDC inserts

Panel fitted insert fastening screws

Grommets and reductions

3 holes Ø 2,8 mm

Cable diameter range: 2,0 -3,0 mm

Black nut for panel-mounting installation

Protection cap for female panel mount connector

Grommets and reductions

hole Ø 9,0 mm

Cable diameter range: 7,0 - 9,0 mm

Crimp matrixes for CG contacts with 35 mm² section

6A female contacts for female inserts with terminal Ø 1mm

Type of connection: Crimp connection

Rated current: 6 A

Positioner inserts female contacts 10A

Polish paper grain size 1000

Grommets and reductions

hole Ø 7,0 mm

Cable diameter range: 7,0 - 9,0 mm

Protection cap for male panel mount connector

IP67

Protection degree: IP67

Double grommet

hole Ø 8 mm

Cable diameter range: 7,0 - 8,5 mm

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø < 5 mm

RJ 45 female connector with 8 data contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

Removal tools for the extraction of contacts from the insert

For 10 A contacts

panel mounting clip

Distance shell for panel mount connectors

Dip solder version, 2-19 contacts

Lock nuts

CH 19,0 mm, 9,5 mm

Anchorages for several earth connections cables, Angled

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø <7.5 mm

Lock nuts

Spiral top Ø 12,5, CH 24,0 mm

Removal tools for the extraction of contacts from the insert

For 16 A contacts

Distance shell for panel mount connectors

Dip solder version, 2-19 contacts

closure cap with silicon belt

RJ45 female connector with 4 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

Clamp for grip panels of cables outside enclosure

To be mounted on CR..SS anchorage

Hand insertion tools

Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm

Blind reduction

Green

Female contact (PU=100pcs) signal

Only for 8 pole HEC connector

Single code pins for 6 codings

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts

Lock nuts

CH 24,0 mm, 11,0 mm

turret heads for 16 A contacts (CCF & CCM series)

Lock nuts

spiral top ∅ 12,5 mm, CH 24,0 mm

Female RJ 45 coupling, 8 data contacts/ 2 power contacts

insulated version

Nominal rated voltage: 50 V

Locking Mecahnism: Single locking lever

Material housing: Plastic

Positioner inserts male contacts 10A

Cable stripper, cuts the cable steath and releases the wires in a single operation

Support for rail mounting DIN EN 60715

For CT,CTS,CTSE

Grommets and reductions

3 holes Ø 3,4 mm

Cable diameter range: 2,5 - 3,0 mm

Panel fitted insert fastening screws

Lock nuts

CH 19,0 mm, 9,5 mm

RJ45 male connector, 4 data contacts cat. 5e profiNET

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

Crimp matrixes for CX7 contacts with 16 mm² section

Crimping tool with automatic positioner

Daniels WA27FAP (inserts excluded)

Blind grommet

Green

Positioner inserts male contacts 10A

Patch cable USB-A/USB-A, 2 meter

I/O adapter module to scan or feed signals

Rear Mounting
Central Locking

Socket head cap screw ISO4762 fitting for diecast hoods

Length is 20,7 mm

blind reduction

green

Covers, with lever and gasket

For female inserts

Turret heads for male contacts 40A

Crimp matrixes for CG contacts with 35 mm² section

Cover with pegs

For 1 lever enclosures

Grommets and reductions

hole Ø max 11,8 mm

Cable diameter range: 9,5 - 13,0 mm

Crimping tool for 5A contacts

Daniels AFM8 model (turret excluded)

plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures

Protection degree: IP65

Brass protective cap

For connectors M16 with male thread

Crimping tool for 5A contacts

Daniels AFM8 model (turret excluded)

Grommets and reductions

2 holes Ø max 5,3 mm

Cable diameter range: 4,5 - 5,5 mm

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø < 5 mm

Grommets and reductions

4 holes Ø 3,3 mm

Cable diameter range: 2,0 - 3,5 mm