A&C Solutions - Producten: Connectoren

RJ45 female connector with 4 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

Brass protective cap

For connectors with female thread

Insertion tool for insertion of the contacts into the inserts

For crimped contacts up to 0.75 mm²

Grommets and reductions

1 hole Ø 3,2 mm

Cable diameter range: 1,5 - 4,5 mm

Protection cap for male panel mount connector

Front fastened

Replacement tip for CCES removal tool

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

panel mounting clip

Brass protective cap

For connectors with male thread

Support for rail mounting DIN EN 60715

For CT,CTS,CTSE

Grommets and reductions

hole Ø max 14,0 mm

Cable clamp

Interface for printed circuit with 6 female contacts (silver)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

Positioner inserts female contacts 10A

modules adapter for 6 poles version

Clamp for grip panels of cables outside enclosure

To be mounted on CR..SS anchorage

Crimp tool for manual crimping of machined crimp contacts

For signal connectors M16 and M23

Crimping tool for POF CX PL and MOST CX ML contacts

RENNSTEIG model

Grommets and reductions

hole Ø 3,0 mm

Cable diameter range: 4,0 - 5,5 mm

Hexagonal nut

2,5 mm

Jacket stripper for POF and MOST fibre optic with PA jacket

Removal tools for the extraction of contacts from the insert

For 10 A contacts

modules adapter for 3 poles version

Kit with 2 elements, for coupling of inserts with screw fixing centre distance

With handle for cable support bands

Crimp matrixes for CY contacts section 16mm²

Grommets and reductions

4 holes Ø 3,4 mm

Cable diameter range: 2,5 - 3,0 mm

Hexagonal nut

2,5 mm

Straight cable clamping plate

Lock nuts

CH 24,0 mm, 14,0 mm (h=21,0 mm)

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

additional cable retention Only for CH 24,0 mm

Blind plug

IP67

Protection degree: IP67

Polish paper grain size 4000

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø < 5 mm

Grommets and reductions

4 holes Ø 3,4 mm

Cable diameter range: 2,5 - 3,0 mm

Screwing for tube

Extraction tool for Mixo Bus connector

For the extraction of he BUS shielded connectors from the MIXO BUS insert

Lock nuts

round,7,5 mm,CH 19,0 mm

Square flange with seal

Crimp matrixes for CY contacts section 25 mm² and 35 mm²

Grommets and reductions

1 hole Ø 6,0 mm

Cable diameter range: 5,5 - 7,0 mm

Flat sealing for fixing thread

PG 9 / M16 x 1,5

cable reduction suggested for silicon-rubber and ∅ ≤ 7,5 mm cables

Metal adaptor

insertion tool for insertion of the contacts into the inserts

And removal tool for the extraction of contacts from the insert for CI contacts

Brass protective cap with chain

For connectors M23 with female thread

RJ45 female connector with 4 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables

Flat sealing for fixing thread

PG 9 / M16 x 1,5

RJ45 male IDC connector

8 data contacts

Grommets and reductions

4 holes Ø 3,3 mm

Cable diameter range: 2,0 - 3,5 mm

Anchorages for several earth connections cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

Removal tools for the extraction of contacts from the insert

For 10 A contacts

Stainless steel protective cap

For connectors with female thread
with rope, length 100 mm

Lock-in tabs for modular units (6units) dividable

Grommets and reductions

5 holes Ø 3 mm

Cable diameter range: 1,5 - 3,5 mm

PCB with two LEDs green/yellow

For cable connectors, screw termination

Fitting connection boards for 1:1 link (pin/socket)

Number of contacts of range: 9-25

Covers with 4 pegs and gasket

For enclosures with 2 levers

blind grommet

yellow

Grip panels for cables outside enclosures equipped with fixing screws and rings

For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts

Plastic protective cap

For connectors with female thread

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

Grommets and reductions

2 holes Ø max 5,3 mm

Cable diameter range: 4,5 - 5,5 mm

Protection cap for male panel mount connector

IP67

Protection degree: IP67

Crimp matrixes for CG contacts with 25 mm² section

Covers for screw locking

Aluminium

Patch cable USB-A/USB-A, 2 meter

Plastic protective cap

For connectors with male/female thread

Male coding and guide pin, for 72 codes

Blind grommet

Yellow

Protection cap for male cable connector

Single coding and guide pin, for 72 codes

Covers with 2 levers

For hoods with 4 pegs

closure cap for TH405-406-409

Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures

25 poles

Protection degree: IP65

Brass protective cap with chain

For connectors with female thread

Grommets and reductions

hole Ø 8,5 mm

Cable diameter range: 7,5 - 9,0 mm

Mounting spanner

Screws for second earth terminal

For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts

Crimping tool for 10A,16A,40A contacts

RENNSTEIG model (turret included)

modules adapter for 5 poles version