Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
233 234 235 236 237
Volgende
size 66.16-CR CPQ
Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
size 77.27mixoCY-CGD 25 C
Crimp matrixes for CY contacts section 16mm²
6000302CC
panel mounting clip
6000156LF*
blind reduction
  • Green
size 104.27mixo-CR 24 AT
Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 604003900*
    Lock nuts
    • Spiral top Ø 12,5, CH 24,0 mm
    size 104.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    6DB01430C
    closure cap with silicon belt
    size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • WTC-1295-1
    Wire termination tool
  • For part number 1295
    • size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • 6000156LF*
    Blind reduction
    • Green
    size 104.62-CRAD
    Straight cable clamping plate
    THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • 604003800
    spiral top ∅ 8.5 mm
    • CH 19,0 mm
    size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • 600022400*
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 104.62-CLC4
    Polish paper grain size 4000
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • 600030600*
    Grommets and reductions
    • 2 holes Ø max 5,3 mm
    Cable diameter range: 4,5 - 5,5 mm
    size 104.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    6000041LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.5 mm cables
    Toon 30 50 100 per pagina
    Vorige
    233 234 235 236 237
    Volgende