Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
223 224 225 226 227
Volgende
size 77.62-CJST
Cable stripper, cuts the cable steath and releases the wires in a single operation
6DB015700*
additional cable retention Only for CH 24,0 mm
size 104.27-CT APE
Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 49.16-CRIC M3
    Panel fitted insert fastening screws
    size 66.16-CCW M25
    Punching nut for M25 hole
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 77.62mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 6000115KC*
    Lock nuts
    • round,7,5 mm,CH 19,0 mm
    size 49.16mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 77.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    AT LCSM
    RJ45/USB/LC Connectors for ATR C22
  • LC-Duplex adapter SM
    • 6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CK 03 CX
    Covers, with lever and gasket
  • For female inserts
    • size 57.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 77.62mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    CZCW 25 L
    Cover with pegs
  • For 1 lever enclosures
    • 6000041LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7,5 mm cables
    5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • CR 37 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 104.62mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • M23cordsets-7.010.9S0.703
    Brass protective cap with chain
    • For connectors M23 with female thread
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    size 77.62mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • 600018200*
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 49.16mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 104.62mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    M16-7.010.9S4.103
    Stainless steel protective cap
    • For connectors with female thread
    • with rope, length 100 mm
    Toon 30 50 100 per pagina
    Vorige
    223 224 225 226 227
    Volgende