Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
225 226 227 228 229
Volgende
6000335BC
Lock nuts
  • Closure cap
600037000
Grommets and reductions
  • hole Ø 5,3 mm
Cable diameter range: 5,0 - 6,5 mm
size 44.27mixo-CIVES
Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 104.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 66.16-CCVPP
    Pneumatic foot valve
    size 77.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    6000086MH*
    Grommets and reductions
    • hole Ø 3,0 mm
    Cable diameter range: 4,0 - 5,5 mm
    6DB015700*
    additional cable retention
    size 44.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 104.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 66.16 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 104.62-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    6000302CC
    panel mounting clip
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    size 44.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CRH 24
    24 pole closure or reduction plate
  • In autoextinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    size 77.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    size 104.62-CCPNP
    "go /no go" control gauge to verify indenter closure
    6000219CC*
    Lock nuts
    • 14,0(h=21,0), CH 24,0 mm
    6DB00750C
    modules adapter for 6 poles version
    size 44.27-CR GND
    Metal adaptor
    CR 24 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • WTW-1293
    Wire termination tool
  • For part number 1293
    • size 104.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • 6000087LF*,**
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    TCHC 10 S
    Covers with 4 pegs
  • Plastic,with loop
    • 6000269CC
    Lock nuts
    • CH 24,0 mm, 11,0mm
    size 44.27mixo-CR 06 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CGC 24 B
    Cover for bayonet locking
  • Aluminium
    • Toon 30 50 100 per pagina
    Vorige
    225 226 227 228 229
    Volgende